KNOWING YOUR MODEM
Back of Modem
RJ11
Power
Ethernet | Reset | USB |
|
Before You Start
Before you start to use your Modem you must have the following:
1.An active ADSL account and line with a user name and password.
2.IP address, DNS, and gateway settings from your ISP only if applicable.
3.At least one computer with either USB or Ethernet connection.
4.TCP/IP networking protocol installed on the computer (most computers have this installed by default).
5.Microsoft® Internet Explorer 5.0 or Netscape® 4.5 or greater installed.
6.It may be necessary to disable any firewall or
TIP: After plugging in the power cord, the Modem initialises and starts working after 20 seconds.
TIP: If you push the Reset button, all the parameter settings will revert back to factory default.
4