How to Install Your Soho KVM Switch

Connecting Your Computers

Step 1

Make sure all your computers are powered off.

Step 2

Using Belkin SOHO KVM Cables (Belkin part number F1D9201-XX), connect one end of the DVI cable to your computer’s DVI monitor port and the other end to the monitor port on the SOHO KVM Switch labeled “PC 1”. See Fig. 2.

Step 3

Connect one end of the USB cable to your computer’s USB port and the other end to the USB port on the SOHO KVM Switch labeled “USB 01”. See Fig. 2.

Step 4

Connect one end of the audio cable to the “Speaker Out” jack on your sound card or computer, and the other end to the “audio” jack on your SOHO KVM Switch below “PC 1” (optional). See Fig. 2.

DC 5V, 2.5A audio

mic

Console

PC 4

PC 3

PC 2

PC 1

Device B

Device A

USB 04

audio

mic

USB 03

audio

mic

USB 02

audio

mic

USB 01

audio

mic

Fig. 2