Belkin F1DB102P2 user manual Connecting Computers to the E Series KVM Switch

Page 11

Installation

Connecting Computers to the E Series KVM Switch

Step 1

Make sure your computer is powered off.

Step 2

Using the Belkin E Series Cable Kit for PS/2 (F1D9002x06), connect the VGA connector to the monitor port on your computer. (Refer to diagram below.)

Step 3

Connect the PS/2 mouse and keyboard connectors to the mouse and keyboard ports on the computer. (Refer to diagram below.)

Step 4

Connect the Belkin E Series Cable Kit for PS/2 to the desired PC port on the rear of the E Series KVM Switch. (Refer to diagram below.)

1

2

3

4

5

6

7

8

section

��

��

��

��

Step 5

Power up your computer.

Step 6

Repeat Steps 1 through 5 for each additional PS/2 computer you wish to connect.

9

Image 11

Contents OmniView E Series KVM Switch Table of Contents Package Contents Hot Keys Feature OverviewCables Equipment RequirementsSystem Requirements Front/Rear View of the 2-Port E Series KVM Switch Unit Display DiagramsFront/Rear View of the 4-Port E Series KVM Switch Specifications Cable-Distance Requirements For PS/2 Computers Pre-ConfigurationWhere to Place the KVM Switch Installation GuideYou are ready to connect your computers Connecting the ConsoleKeyboard, Monitor, and Mouse Connections Connecting Computers to the E Series KVM Switch Powering Up the Systems Using your E Series KVM Switch Selecting a Computer Using the Selector ButtonLED Display Selecting a Computer Using Port-Selector ButtonsAutoScan Mode Command Function Keyboard Hot-Key-Command Shortcut ReferenceDoes the KVM Switch support Linux? How far can the computer be from the KVM Switch?Do I have to install any software to use the KVM Switch? Does the KVM Switch require an AC adapter?Am getting a black screen on my monitor Computer boots up, but the mouse does not work Mouse is not detected at boot upGlossary FCC Statement How state law relates to the warranty How to get serviceBelkin International, Inc Belkin Tech Support Belkin B.V