Belkin WINDOWS NT/2k/XP manual

13.Click on the DETAILS tab. In the pull-down menu “Print to the following port:”, select the correct port this printer is connected to on the Bitronics switch:

•LPx1 – PA (auto switch) ! Select this if the printer is connected to Port A of the Bitronics switch

•LPx1 – PB (auto switch) ! Select this if the printer is connected to Port B of the Bitronics switch

In the image below, the printer is connected to Port B of the Bitronics switch. Therefore, LPx1 – PB (auto switch) is selected. When done, click OK.

11