P73227/F1D082/e/AM/man.qxd 4/19/00 5:17 PM Page 4
Installation
1.Power off the Sun Workstation. There is no need to power off the OmniView™ or anything else connected to it.
2.Connect the 13W3 cable from the video port of the Sun to the 13W3 Sun video connector on the Sun Adapter.
3.Connect the MiniDIN 8 cable from the keyboard / mouse port of the Sun to the MiniDIN 8 connector on the Sun Adapter.
4.Connect the PS/2 cable kit cables from the HDDB15, PS/2 keyboard and mouse connectors of the Sun Adapter to a free port on your OmniView™.
5.Verify that all connections are correct.
6.Set the DIP switches according to the table below, and to your monitor’s capabilities:
SW1 | SW2 | SW3 | Monitor Resolution |
|
|
|
|
DOWN | UP | UP | 1152 x 900 @ 76 Hz |
DOWN | DOWN | UP | 1152 x 900 @ 76 Hz |
UP | UP | DOWN | 1152 x 900 @ 66 Hz |
DOWN | UP | DOWN | 1280 x 1024 @ 76 Hz |
UP | DOWN | DOWN | 1600 x 1280 @ 76 Hz |
4