Belkin P75179ea Placement of the Switch, Placement on a Flat Surface, Placement in a 19-Inch Rack

Page 10

Placement of the Switch

The Switches can be placed on a flat surface or in a 19-inch rack.

Placement on a Flat Surface

1.Affix the four included rubber feet on the bottom of the Switch in the area that is clearly marked on each of the four corners.

2.Make sure the Switch is placed in an area that allows for proper ventilation.

3.Place on a flat surface.

Placement in a 19-Inch Rack

1.Do not affix the four rubber feet on the Switch when rack-mounting. If already affixed, remove.

2.Attach the mounting bracket to each side of the Switch with the included screws.

3.Place the Switch in the rack and align the holes of the mounting bracket with the correct hole in the rack.

4.Place and tighten the screws of each mounting bracket into the rack.

1

2

3

4

5

6

7

8

section

7

Image 10

Contents Port Gigabit Switch F5D5141ea16 Table of Contents Introduction Features GettingIntroductionto Know your SwitchPackage Contents Front-Panel LEDs Getting to Know your SwitchPower Power LED Link and Activity Link/Act LEDConnecting Networking Devices to your Switch Connecting your Switch to your ComputersCabling Distances Connecting your Switch to another SwitchRecommended Cabling Standard Bridging Functions PlacementApplicationsof the SwitchSwitching Functions Sample ApplicationPlacement on a Flat Surface Placement of the SwitchPlacement in a 19-Inch Rack Product Specifications Switching Criteria Troubleshooting Diagnosing Switch IndicatorsInstallation Power and Cooling ProblemsBefore you Call EMI Certification FCC Class a Certification USA InformationIndustry Canada Class a LVD Safety Compliance InformationHow to get service What will we do to correct problems?What is not covered by this warranty? What the period of coverage isHow state law relates to the warranty Following information is only for EU-member states