Belkin F1DS104L, F1DS102L manual Keyboard, Mouse is lost when I switch to a different channel

Page 29

Troubleshooting

KEYBOARD

Problem:

Computer does not detect keyboard and I get a keyboard error reported at boot up.

Solution:

Check that the keyboard cable between the KVM Switch and the computer is connected properly. Tighten any loose connections.

Try swapping your keyboard with a different one.

Try connecting the computer to a different port.

If you are using the keyboard software that was included with your keyboard, uninstall it and install the standard Microsoft keyboard driver.

MOUSE

Problem:

Mouse is lost when I switch to a different channel.

Solution:

Check that the mouse you are using is connected properly to the console of the KVM Switch.

If you are using a mouse driver that was included with your mouse, uninstall it and install the standard Microsoft mouse driver.

Disconnect and reconnect the mouse cable attached to the channel with which you are experiencing problems to resynchronize the mouse connection.

Attach the mouse directly to the computer with which you are experiencing mouse problems.

If the computer just awoke from standby mode, allow up to one minute to regain mouse function.

Deactivate power-management schemes on the PC with which you are experiencing problems.

Try swapping the mouse with a different one.

1

2

3

4

5

6

7

8

section

27

Image 29
Contents OmniView Soho KVM Switch with Audio Table of Contents Introduction Package ContentsOverview Feature OverviewEquipment Requirements Overview Unit Display DiagramsFront View Back ViewDimensions SpecificationsPre-Configuration Installing the KVM SwitchStep Connecting the KVM SwitchConnect the Audio Installing the KVM SwitchAudio and Microphone Connections Powering Up the Systems Selecting a Computer Using Direct-Access Port Selectors Using the KVM SwitchHot-Key Preceding Sequence Configuration Select Audio & Mic Channel ScrLk + ScrLk + Fy Using the KVM SwitchSwitching the Audio/Mic Host PC since the mouse is used to perform the upgrade Firmware-Upgrade GuidePrepare your KVM Switch and the Host PC Step Step Activate the Firmware-Upgrade Utility Program Connect your KVM Switch to the Host PC Step Firmware-Upgrade GuideBegin the File Upload Step Prepare your KVM Switch and the Mac Host Step Upgrade Using the Mac Version UtilityFirmware-Upgrade Guide Firmware-Upgrade Guide Connect your KVM Switch to the Mac Host Step Begin the File Upload Step Firmware-Upgrade Guide Which operating systems does the KVM Switch support? FAQsWhat does flash-upgrade capability mean? Do I have to install any software to use the KVM Switch?Does the Soho KVM Switch support Linux? Can I use the KVM Switch to switch video signals only?Does the KVM Switch support Microsoft keyboards? How long is the warranty for the KVM Switch?Am getting a black screen on my monitor TroubleshootingKeyboard Mouse is lost when I switch to a different channelComputer boots up fine, but the mouse does not work TroubleshootingMouse is not detected at boot up Audio and Microphone Progress bar stops for a long time without any advancement Firmware-Upgrade TroubleshootingCE Declaration of Conformity InformationFCC Statement What is not covered by this warranty? What will we do to correct problems?How to get service InformationHow state law relates to the warranty Belkin International, Inc Belkin Tech SupportBelkin B.V