Belkin PM01146EA-A F5D4047V2 Installing and Setting Up the Adapters, Overview Hardware Setup

Page 7

Installing and Setting Up the Adapters

Table of Contents sections1234

Overview

Hardware Setup

Installation of the Powerline AV Networking Adapter takes only seconds and does not require setting up long wires throughout the house.. Simply plug the units directly into any available wall outlet and connect to any device with an Ethernet port.. Users have the option to randomly change the security password for their powerline network..

1. Plug your network cable into the device’s RJ45 network adapter port..

2. Plug the other end of your network cable into the RJ45 port located at the back of the Adapter..

3. Plug the power cable or wall adapter into the power connector at the back of the Adapter..

4. Insert the power plug of your power cable or wall adapter directly into a power outlet in the wall..

NOTE: Do not plug the device into a UPS or power strip with surge protection as they may filter the powerline signal.

5. Repeat this process for the second Adapter..

Powerline AV Networking Adapter

5

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Powerline AV Networking Adapter Table of Contents Sections IntroductionIntroduction FeaturesProduct Specifications System Requirements Package ContentsOverview Hardware Setup Installing and Setting Up the AdaptersOverview Changing the Network PasswordConfiguration Country Number Internet adress Information How to get service What this warranty coversWhat the period of coverage is How state law relates to the warranty
Top Page Image Contents