Belkin F5D5141-5 Placement of the Switch, Placement on a Flat Surface, Placement on the Wall

Placement of the Switch

The Switches can be placed on a flat surface or on the wall.

Placement on a Flat Surface

1.Affix the four rubber feet shipped with the Switch on the bottom of the Switch in the area that is clearly marked on each of the four corners.

2.Make sure the Switch is placed in an area that allows for proper ventilation.

3.Place on a flat surface.

Placement on the Wall

1.The wall-mount slots are two keyholes on the bottom of the Switch. Attach two screws to the wall so that the Switch’s wall-mount slots line up with the two screws.

2.Place the Switch so that it rests on the two screws.

3.Set the Switch on a flat surface in an open area to maximize ventilation. Allow at least 2.5 inches on each side of the Switch for proper ventilation and four inches at the back for proper cable clearance.

4.Make sure the power cable is close enough to reach a power outlet.

8