Belkin F5U301 user manual Installation, Step

Page 8

1

2

3

4

5

6

Installation

The following diagram illustrates the basic steps in connecting and getting started with the dongle.

Note: Do not attach the USB dongle before the host drivers are installed.

Step 1

Install software and drivers from the included CD-ROM.

Step 2

Connect the USB Dongle to the PC and approve the multiple-driver installation.

Step 3

Connect the included power adapter to the Cable-Free USB Hub.

Step 4

Open the Wireless Hub utility from the system tray and register the product ID number found on the bottom of the Hub. Then, approve the final driver installation on the PC.

Step 5

Connect USB peripherals to the

Cable-Free USB Hub.

6

Image 8

Contents Cable-Free USB Hub Table of Contents Introduction Package Includes FeaturesSystem Requirements For PC Users Introduction Technical Speciﬁcations Indicator-Light Status Power Supply Operating RangeCertiﬁcations HumidityInstallation StepInstall the USB Drivers and Software Connecting the USB Dongle Connecting the HubUninstalling the Software Operation Status IndicationConﬁguration Properties Property Description Connection StatusOperation Wireless channel selection Cable-Free USB Hub Connection Status screenPairing and Association/Connection Registration PairingAutomatic Association Changing Association/Registration Pairing Maintenance Closing the Connection Manager ApplicationHub LED Indicators TroubleshootingDongle LED Indicator Support for USB Classes Wireless Link Out of RangeChannel Busy Troubleshooting Extended or External Wired USB Hub ConnectionsReading Software and Firmware Versions Belkin applicationPC host drivers version Cable-Free USBTechnical Specifications Technical Specifications Information FCC StatementWhat is not covered by this warranty? Information Cable-Free USB Hub