Belkin F5U219, P73941 manual Installation

Page 10

Installation (continued)

Installation Procedure for Windows 2000 OS

This installation procedure will successfully install two USB OHCI host controllers and a single USB 2.0 enhanced host controller.

1.Locate an available PCI slot on your computer.

2.Insert the PCI Card into the slot. Apply pressure as needed until it is fully seated.

3.Insert the Belkin USB 2.0 driver installation CD into your computer’s CD-ROM drive.

4.After installing the PCI Card, turn on the computer.

5.After loading, the Windows 2000 OS will detect “NEC PCI to USB Open Host Controller”. The required driver support will be automatically installed. No user input is required. This will repeat one more time.

6.The Windows OS will detect “Universal Serial Bus (USB) Controller”. This is the USB 2.0 EHCI host controller. The “Found New Hardware Wizard” window will appear. Select “Search for a suitable driver for my device (recommended)” and

click “Next”.

8

Image 10
Contents Belkin USB Dual-Port PCI Card Page Introduction Features SpecificationsPackage Contents System RequirementsOperating System Compatibility Installation Installation Procedure for Windows 98 SE OSInstallation Installation Installation Installation Installation Installation Installation Installation Information FCC StatementBelkin Components