![](/images/new-backgrounds/1168229/1682293x1.webp)
Using the Serial or USB cable (included with purchase), connect the desired cable to your UPS then connect the other end to the Serial or USB port on your computer.
Caution: Use only the
UPS monitoring cables.
USB: HID Windows Setup Procedure
*For installation on other operating systems, please consult the software’s manual
Hardware Installation
1.Connect the Serial/USB cable to the battery backup’s communication port.
2.Connect the Serial/USB cable to the PC’s communication port.
3.Make sure the communication port selector on the back of the battery backup is either on “USB” or
Do not connect both USB and Serial at the same time.
Software Installation
1.Insert the Belkin Power Management Software CD to the
(Default:C:\Program Files\Belkin Power
Management Software\)
2.After installation. For Windows 95/98, check if there is a ‘Rupsmon Daemon’ icon in task bar. For Windows NT, go to ‘control
3.Click ‘Belkin Power Management Software’ for parameter settings.
4.Click ‘Select UPS’ to monitor local or remote UPS.
5.Click ‘Settings’ to set ‘Communication Type’ and ‘Select Comm Port’. If you see ‘Communication with UPS’ on the main screen, this means you have connected with UPS.
Uninstall Belkin Power Management Software
To uninstall the shutdown software and remove it from the system, please go to Windows start menu \ “Belkin Power Management Software Uninstall.”
TECHNICAL SPECIFICATIONS
All specifi cations are subject to change without prior notice.
MODEL | F6H350ukUNV |
| F6H500ukUNV |
| F6H650ukUNV | ||
| Capacity | 350VA / 210W |
| 500VA / 300W |
| 650VA / 390W | |
INPUT | Voltage |
|
|
| |||
Range |
|
|
| ||||
|
|
|
|
|
| ||
| Frequency |
|
| 50 Hz (±3 Hz) |
| ||
|
|
|
|
|
| ||
| Voltage |
|
| 230 VCA +/- 6 % |
| ||
OUTPUT | Frequency |
|
| 50 Hz (±1 Hz) |
| ||
| (on battery) |
|
|
| |||
|
|
|
|
|
| ||
| Backup |
|
| ||||
| time |
|
| ||||
|
|
|
|
|
| ||
|
|
|
|
|
|
| |
| Under/Over |
|
|
|
|
| |
BATTERY | Voltage |
| 165~276 VCA +/- 6 % |
| |||
Transfer to |
|
| |||||
|
|
|
|
|
| ||
| Battery |
|
|
|
|
| |
| Typical |
|
|
|
|
| |
| Recharge | 12 hr. (charge prior to use) | |||||
| Time |
|
|
|
|
| |
SURGE | Max. Spike |
|
|
|
|
| |
Amps / | Max. Spike Amperage: 45,000 Amps / 1620 Joules | ||||||
PROTECTION | |||||||
Joules |
|
|
|
|
| ||
|
|
|
|
|
| ||
|
|
| |||||
Conformance | Safety | Complies to British Safety Standards | |||||
|
|
|
|
|
|
| |
| Dimensions | 363x141x90 mm |
| 363x141x107 mm | |||
PHYSICAL | (L X W X H) |
| |||||
|
|
|
|
| |||
| Net Weight | 4.89 kg |
| 5.94 kg |
| 6.16 kg | |
|
|
|
|
|
|
|
STORAGE
Storage Conditions
Store the UPS covered and upright in a cool, dry location with its battery fully charged. Before storing, charge the UPS for at least four hours. Disconnect any cables connected to the computer interface port to avoid unnecessary drainage of the battery.
Extended Storage
During extended storage in environments where the ambient temperature is +5 o F to +86 o F, charge the UPS battery every six months. During extended storage in environments where the ambient temperature is +86 o F to +113 o F, charge the UPS battery every three months.
Note:
Away from sunlight Away from heat | Away from water |
Belkin Corporation User License Agreement
Belkin Corporation (“Belkin”) thanks you for choosing one of our products. This User License Agreement (“Agreement”) contains the terms and conditions under which limited use of the product is licensed to you.
PLEASE READ THIS NOTICE CAREFULLY. DO NOT USE THE SOFTWARE OR PRODUCT UNTIL YOU HAVE READ AND AGREED TO THIS AGREEMENT. IF YOU USE THE SOFTWARE AND PRODUCT, YOU ARE AGREEING TO THE TERMS AND CONDITIONS SET OUT IN
THIS AGREEMENT. IF YOU DO NOT ACCEPT THESE TERMS AND CONDITIONS, YOU MUST RETURN THE UNOPENED PRODUCT WITH THE DISKS INSIDE TO THE PARTY FROM WHOM YOU RECEIVED IT.
SCOPE OF USE: In this Agreement, software means all
or improvements to such programs and all copies of such programs and fi les. You, a single user opening this envelope (You or Your), may use the software on a single central processing unit. You may not rent it, loan it out, or lease it, nor use it on a
LICENSE: You have the
USE AND RESTRICTIONS: You are permitted to make backup copies of all the software disks for archival purposes only. You must reproduce the proprietary notice set forth on the disks and affi x them to all backup copies. You
are not permitted to use these programs in connection with a computer service, or to use the backup copies other than as a replacement for the original copy.
TERM: This license is effective upon acceptance by opening this envelope or in any other way using the enclosed software, which will constitute your acceptance of, and agreement
to, this Agreement, and is effective until terminated. The limited license in this Agreement will be automatically terminated if you fail to comply with any of the Terms and conditions in this Agreement. You agree that upon such termination you will immediately destroy all programs and documentation, including all copies made or obtained by you.
SOFTWARE, PROGRAM, DOCUMENTATION, AND ANY RELATED INFORMATION, GOODS OR SERVICES ARE PROVIDED WITH NO WARRANTY OR REPRESENTATION OF ANY KIND WHATSOEVER. BELKIN HEREBY DISCLAIMS ALL OTHER WARRANTIES, EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
The entire risk of the use, results and performance of the software, program and documentation is borne by you. Should any or all of the product, software, program, documentation, or related information, goods or services be defective, misused, unsuitable or cause or give rise to any harm or liability whatsoever, you, not Belkin or its associates, dealers or agents, assume the entire liability, cost of repair, correction or any payment or other remedy whatsoever. Furthermore, no warranty or guarantee is made regarding the use or results of the product, software, program, documentation, or any related information, goods or services in terms of correctness, accuracy, reliability, timeliness or otherwise. You use and rely on the program at your own risk. The following is the only and exclusive warranty and remedy of any kind: Belkin does warrant that the program disks are free from physical defects in materials and workmanship under normal use for a period of one (1) year from the date of purchase, as evidenced by a copy of the sales receipt. Return the defective disk or documentation with your receipt directly to Belkin for a replacement.
DISCLAIMER: Belkin or its associates will in no event be liable (i) in any amount for lost profi ts or special, incidental, punitive or consequential damages, or (ii) for any claim or damage of any nature, or under any theory, whatsoever, in any amount in excess of the purchase price you paid for the product. The warranties and remedies here set forth are exclusive, and in lieu of all others oral or written, express or implied. Some jurisdictions do not allow exclusion or limitation of implied warranties or of liability for incidental damages, so the foregoing limitations or exclusion may not apply to you. This warranty gives you specifi c legal rights, which vary from jurisdiction to jurisdiction.
HOWEVER, YOU WAIVE SUCH RIGHTS, EXCEPT AS EXPRESSLY PROVIDED UNDER THE TERMS AND CONDITIONS OF THIS AGREEMENT, TO THE MAXIMUM EXTENT ALLOWED BY LAW.
The license is governed by the laws prevailing in the State of New York, without regard to its confl icts of laws principles.
ACKNOWLEDGMENT:
By opening the package on which this Agreement is printed, or through which it is visible, you acknowledge that you have read this Agreement, understand it, and agree that this Agreement is the complete and exclusive statement of agreement between yourself and Belkin and supersedes any prior agreements, oral or written, and any other communications relating to the subject matter of this Agreement.
SEVERABILITY:
Any term or provision of this Agreement or any application thereof, which may be prohibited or unenforceable by law in a particular jurisdiction, shall be interpreted and enforced to the maximum extent allowed in such jurisdiction (which the parties acknowledge could mean severing the provision from this Agreement or, if allowed, enforcing it in a narrower form), without affecting the remainder of this Agreement, or any other application of such term or provision in such jurisdiction, or application of such term or provision in any jurisdiction.
SAFETY INFORMATION
CAUTION!
•Internal battery voltage is 12V DC.
•The unit is intended for installation in a controlled environment (temperature controlled, indoor area free of conductive contaminants).
•All batteries used are sealed lead batteries. Batteries must be recycled.
Please visit belkin.com for battery replacement information.
Recycling Information
Your UPS contains a
CONTACT BELKIN
To contact Belkin for any reason, please fi nd our international offi ce contact information below.
Belkin Corporation
501 West Walnut Street Compton, CA,
+1 310 898 1111 fax
Belkin Ltd.
Express Business Park
Shipton Way, Rushden, NN10 6GL, United Kingdom +44 (0) 1933 35 2000
+44 (0) 1933 31 2000 fax
Belkin B.V.
Boeing Avenue 333
1119 PH
+31 (0) 20 654 7300
+31 (0) 20 654 7349 fax
Belkin GmbH
Hanebergstrasse 2
80637 Munich, Germany
+49 (0) 89 143405 0
+49 (0) 89 143405 100 fax
Belkin SAS
5 Rue du Petit Robinson, 3ème étage
78350 Jouy en Josas, France
+33 (0) 1 34 58 14 00
+33 (0) 1 39 46 62 89 fax
Belkin Nordic
Knarrarnäsgatan 7
164 40 Kista, Sweden
+46 (0) 8 5229 1870
+46 (0) 8 5229 1874 fax
Belkin Ltd.
7 Bowen Cresent, West Gosford NSW 2250, Australia
+61 (0) 2 4372 8600
+61 (0) 2 4372 8603 fax
Belkin Tech Support
Europe: 00 800 223 55 460
US: 877 736 5771
| TROUBLE SHOOTING |
| ||
PROBLEM | POSSIBLE CAUSE | SOLUTION |
| |
| On/Off/Test button | Press the On/Off |
| |
| not pushed or pushed | /Test button for more |
| |
UPS not on, | less than 3 seconds | than 3 seconds |
| |
|
|
| ||
LED not lit | Battery voltage | Recharge the UPS |
| |
| is too low | at least 12 hours |
| |
| UPS fault | Contact Belkin |
| |
| Technical Support |
| ||
|
|
| ||
| Power cord loose |
| ||
| power cord |
| ||
|
|
| ||
| AC breaker is burned | Replace or reset |
| |
UPS always on | out or tripped | the breaker |
| |
battery mode |
|
|
| |
AC utility voltage |
|
| ||
|
|
| ||
| is too high or too | Normal condition |
| |
| low, or blackout |
|
| |
|
|
|
| |
| Battery not fully | Recharge the UPS |
| |
| charged | at least 12 hours |
| |
|
| Check wattage of | 650 | |
Backup time | UPS is overloaded | connected equipment | ||
and remove some | _ | |||
too short |
| 500 | ||
| unnecessary loads | |||
|
| |||
|
|
| ||
|
|
|
| |
| Charger fault or | Replace battery. | F6H350 | |
| Contact Belkin | |||
| other reason |
| ||
| Technical Support |
| ||
|
|
| ||
The UPS |
| Remove the | P74778uk | |
continuously | Overload | |||
| ||||
beeps |
|
| ||
|
|
| ||
|
|
|
|
www.belkin.com
P74778uk_F6H350_500_650.indd 2
7/7/05 3:44:38 pm