Belkin F5D7234-4 user manual Dhcp Server, IP Pool, Lease Time, Local Domain Name

Page 44

Using the Web-Based Advanced User Interface

Table of Contents

sections

1

2

3

4

5

6

7

8

9

10

1.IP Address

The “IP address” is the internal IP address of the Router. The default IP address is “192.168.2.1”. To access the Web-Based Advanced User Interface, type this IP address into the address bar of your browser. This address can be changed if needed. To change the IP address, type in the new IP address and click “Apply Changes”. The IP address you choose should be a non-routable IP. Examples of a non-routable IP are: 192.168.x.x (where x is anywhere between 0 and 255), and 10.x.x.x (where x is anything between 0 and 255).

2.Subnet Mask

There is no need to change the subnet mask. This is a unique, advanced feature of your Belkin Router. It is possible to change the subnet mask if necessary; however, do NOT make changes to the subnet mask unless you have a specific reason to do so. The default setting is “255.255.255.0”.

3.DHCP Server

The DHCP server function makes setting up a network very easy by assigning IP addresses to each computer on the network automatically. The default setting is “On”. The DHCP server can be turned OFF if necessary; however, in order to do so you must manually set a static IP address for each computer on your network. To turn off the DHCP server, select “Off” and click “Apply Changes”.

4.IP Pool

The range of IP addresses set aside for dynamic assignment to the computers on your network. The default is 2–100 (99 computers). If you want to change this number, you can do so by entering a new starting and ending IP address and clicking on “Apply Changes”. The DHCP server can assign 100 IP addresses automatically. This means that you cannot specify an IP address pool larger than 100 computers. For example, starting at 50 means you have to end at 150 or lower so as not to exceed the 100-client limit. The starting IP address must be lower in number than the ending IP address.

5.Lease Time

The length of time the DHCP server will reserve the IP address for each computer. We recommend that you leave the lease time set to “Forever”. The default setting is “Forever”, meaning that any time a computer is assigned an IP address by the DHCP server, the IP address will not change for that particular computer. Setting lease times for shorter intervals such as one day or one hour frees IP addresses after the specified period of time. This also means that a particular computer’s IP address may change over time. If you have set any of the other advanced features of the Router such as DMZ or client IP filters, these are dependent on the IP address. For this reason, you will not want the IP address to change.

6.Local Domain Name

The default setting is “Belkin”. You can set a local domain name (network name) for your network. There is no need to change this setting unless you have a specific advanced need to do so. You can name the network anything you want such as “MY NETWORK”.

Wireless G Router

42

Page 43 Page 45
Image 44
Page 43 Page 45
Contents Wireless G Router Table of Contents Benefits of a Home Network Advantages of a Wireless NetworkIntroduction Placement of your Router for Optimal Performance Important Factors for Placement and SetupWireless Router Placement Avoid Obstacles and InterferenceChoose the Quietest Channel for your Wireless Network Cordless PhonesSecure Connections, VPNs, and AOL Product Features Product OverviewBuilt-In Dynamic Host Configuration Protocol Dhcp Setup Assistant SoftwareIntegrated 802.11g Wireless Access Point Support for VPN Pass-ThroughPackage Contents Setup Assistant Software System RequirementsKnowing your Router System RequirementsRouter/Power Status Wired-Computer StatusInternet Status Modem StatusWi-Fi Protected Setup WPS button Wireless-Computer StatusWireless Security Power Jack Reset ButtonResetting the Router Restoring the Factory DefaultsModem Requirements Connecting and Configuring your RouterSetup Assistant Connecting and Configuring your Router Setup CD Select Country Confirmation Screen Progress Checking Settings Verifying Hardware Connections Naming your Wireless Network Configuring the Router Checking Internet Connection Congratulations Troubleshooting Optional Assistance Connecting Other ComputersSet Up Wireless Security Run the Security Assistant Software Progress Screen Picking the Security Type Creating a Network Key Transferring the Key Verifying the Connection Congratulations Alternate Setup Method Alternate Setup Method Logging into the Router Logging out of the Router Using the Web-Based Advanced User Interface Internet Status Indicator Login/Logout ButtonQuick-Navigation Links Home ButtonLAN Settings Name FeaturesInternet WAN Settings Version InfoSetting your Connection Type Change WAN MAC Address IP Address Provided by your ISP. Enter your IP address hereSubnet Mask ISP Gateway AddressSetting your ISP Connection Type to PPPoE Your connection type is PPPoE ifPassword Service NameUser Name MTUAlternate Setup Method Get IP by Dhcp Default GatewayUser ID Setting Custom Domain Name Server DNS Settings Cloning your MAC Address Using the Web-Based Advanced User Interface Changing LAN Settings Dhcp Server IP PoolLease Time Local Domain NameConfiguring the Wireless Network Settings Viewing the Dhcp Client ListChanging the Wireless Network Name Ssid Ssid Broadcast Feature Using the Wireless Mode SwitchMixed 11b+11g Mode 11g Only Mode11b Only Mode When to Use 11b Only ModeChanging the Wireless Channel Protected Mode Switch Bit WEP Securing your Wi-FiNetworkWired Equivalent Privacy WEP Encryption Keys Wi-Fi Protected Access WPA Using a Hexadecimal Key Sharing the Same Network KeysWEP Setup Bit WEP Encryption AF 0F 4B C3 D4 = 64-bit WEP keyC3 03 0F AF 0F 4B B2 C3 D4 4B C3 D4 E7 = 128-bit WEP key Changing the Wireless Security Settings Using Wi-Fi Protected SetupWPA Setup Setting WPA/WPA2 Guest Access OptionalUsing the Web-Based Advanced User Interface Using the Web-Based Advanced User Interface Using the Access Point Mode Configuring the Firewall Configuring Internal Forwarding Settings Entering Settings into the Virtual ServerSetting Client IP Filters Setting MAC Address Filtering Enabling the Demilitarized Zone DMZ Using Dynamic DNS Setting up the Router’s Dynamic DNS Update ClientUtilities Tab Restoring Factory Default Settings Restarting the RouterSaving a Current Configuration Restoring a Previous Configuration Updating the Firmware Using the Web-Based Advanced User Interface Changing System Settings Using the Web-Based Advanced User Interface Setting the Time and Time Zone Enabling Remote ManagementEnabling/Disabling Auto Firmware Update Enabling/Disabling UPnPManually Configuring Network Settings Manually Configuring Network Settings Manually Configuring Network Adapters in Windows 98SE or MeManually Configuring Network Adapters in Mac OS up to Manually Configuring Network Settings Manually Configuring Network Settings Recommended Web Browser Settings Internet Explorer 4.0 or HigherRecommended Web Browser Settings Netscape Navigator 4.0 or HigherSolution TroubleshootingProblem Troubleshooting Setup Assistant cannot connect my Router to the Internet Troubleshooting Can’t connect to the Internet wirelessly Troubleshooting Limiting the Wireless Transmit Rate How do I extend the range of my wireless network? C3 03 0F AF 4B B2 C3 D4 4B C3 D4 E7 E4 = 128-bit key For example C3030FAF4BB2C3D44BC3D4E7E4 = 128-bit key Do Belkin products support WPA? Troubleshooting Troubleshooting Enabling WPA-PSK no server Compatibility Technical Support Information FCC StatementF5D7234-4 Federal Communications Commission NoticeModifications Europe-European Union NoticeCanada-Industry Canada IC IC Radiation Exposure StatementBelkin International, Inc., Limited 1-Year Product Warranty How state law relates to the warranty 102

F5D7234-4 specifications

The Belkin F5D7234-4 is a versatile wireless router known for its robust performance and user-friendly features, making it a popular choice for both home and small office environments. With a focus on delivering reliable wireless connectivity, this router supports 802.11g Wi-Fi technology, capable of speeds up to 54 Mbps. This standard offers sufficient bandwidth for most typical internet usage scenarios, such as streaming music, browsing the web, and online gaming.

One of the standout features of the Belkin F5D7234-4 is its built-in four-port Ethernet switch, enabling wired connections for devices that require a more stable and faster connection, such as gaming consoles or desktop computers. Additionally, this router allows for easy network configuration using a straightforward setup wizard. Users can get connected quickly without needing extensive technical knowledge.

Security is also a priority with the F5D7234-4. It includes WPA and WPA2 encryption protocols to safeguard the wireless network from unauthorized access. This ensures peace of mind for users who are concerned about network security. Moreover, the router features a firewall built into the device, which provides an additional layer of protection against external threats.

The range of the wireless signal is another benefit, thanks to its omnidirectional antennas. This feature allows the router to provide substantial coverage, ensuring a strong signal throughout a typical home or office space. Users have reported reliable connections even at a distance from the router, which is an essential aspect for larger environments.

Another notable characteristic is its compatibility with various operating systems and devices. Whether using Windows, Mac OS, or even mobile devices, the Belkin F5D7234-4 seamlessly integrates, making it a versatile choice for mixed-device networks.

In terms of advanced features, the router includes Quality of Service (QoS) settings, allowing users to prioritize bandwidth for specific applications or devices. This can be particularly useful in households with heavy internet usage, ensuring smooth performance for streaming or gaming activities.

In conclusion, the Belkin F5D7234-4 is a well-rounded wireless router offering essential features like reliable security, decent wireless range, and straightforward setup. These characteristics make it an excellent option for users seeking a practical and efficient networking solution. Its blend of performance and user-friendliness has helped cement its place in the market as a trusted choice for many.
Top Page Image Contents