®
Self Help Guide
Choose the connection: ‘PPPoA’ as indicated and press ‘Next’.
You will need to enter the settings as provided by your Internet Service Provider (ISP).
If you have options such as Encapsulation and MTU, then these should be set to VCMUX and 1454 respectively.
Once all the appropriate settings have been entered, you may click on ‘Apply Changes’ so that the Modem Router can save the data and attempt a connection on the basis of the information.
You will see a notification that your ‘Data Is Being Saved’ after which you may be returned to the same page again. Navigate to the ‘Home’ page by using the navigational bar at the top of the Interface.
The Modem Router should now show you that the ‘Internet Status’ is ‘Connected’ in the top
www.belkin.com | Page 31 of 31 |