Belkin F7D6301 user manual Am having difficulty setting up WPA security on my Router

Troubleshooting, Support, and Warranty

Does the Router support Wireless

Protected Access (WPA) security?

The Router ships with WPA/WPA2 security turned on.. Windows XP and some older network hardware may require a software update to support WPA/WPA2..

I am having difficulty setting up WPA security on my Router..

1..Log in to your Router by visiting http://router/ with your web browser.. Click on the “Login” button in the top right-hand corner of the screen.. You will be asked to enter your password.. If you have never set a password, leave the “Password” field blank and click “Submit”..

2..Click “Wireless” in the left-hand menu.. Then click “Security” just below that..

3..Select the “WPA/WPA2” option..

4..Enter a password.. This can be from 8–63 characters of your choice, including spaces and punctuation, OR a 64-digit hexadecimal number (using only the numbers 0–9 and letters A–F)..

5..Click “Apply Changes” to finish.. Your wireless connection is now encrypted.. Each computer using your wireless network will need to use the new key..

Note: If you are configuring the Router over a wireless connection, you will have to re-connect to the Router after changing any security settings..

Note: Some older networking hardware supports only WEP encryption.. If your older computers cannot connect to your network, try 128-bit or 64-bit WEP, or seek software updates from their manufacturers..

20