Getting to Know Your Router
Back Panel
(a)
(b)
(c)
(d)
(e)
A) Modem (WAN) Connector
Connect your modem to this port using an Ethernet cable..
B) Wired (LAN) Connectors
Connect computers and other wired network devices to these ports using Ethernet cables..
C) USB Port
USB printers, disks, and other USB devices plugged into this port will be shared on your network.. Each USB port has a light that indicates its status..
Off: No USB device is connected or the attached USB device is not in use..
Blinking: Please wait to unplug the device until the light turns off..
On: The USB device is connected and being shared on your network..
D) Reset Button
This button is used to restart your Router in rare cases when it functions incorrectly.. Resetting the Router will preserve your settings.. This button may also be used to restore the factory default settings.. Please see the Troubleshooting section
for more information..
E) Power Connector
Connect the included power supply to this jack..
18