Setting Up your Computers
4.Write down the IP address and subnet mask from the “IP Address” tab (3).
5.Click the “Gateway” tab (2). Write down the gateway address in the chart.
6.Click the “DNS Configuration” tab (1). Write down the DNS address(es) in the chart.
7.If not already selected, select “Obtain an IP address automatically” on the IP address tab. Click “OK”.
Restart the computer. When the computer restarts, your network adapter(s) are now configured for use with the Router.
Set up the computer that is connected to the cable or DSL modem by FIRST using these steps. You can also use these steps to add computers to your Router after the Router has been set up to connect to the Internet.
1
2
3
4
5
6
7
8
9
10
section
71