IV. Take the used Ciss off, Refill ink

IV. Take the used CISS off

During printing, if you need to take the system off, please first take off air filter, insert back air plug, move tube valve to CLOSE position (4-1-1), Move out cartridge holder, detach the rack (4-1-2) (can't be too rude to change the shape of rack). Take ink cartridges out, press back the red cover at 45 degree angle (4-1-3).

Notice: If you do not close the tube valve before taking the cartridge out, or you do not install the red cover back to cartridge, it maybe result that ink in the cartridges will flow back to the external tank or flow out from the cartridge nozzle, these case will damage the second normal use of system.

Pic. 4-1-1

Pic. 4-1-2

Pic. 4-1-3

V. Refill ink

During printing, if you found out that the ink level in the tank is below the red line, please add ink according to the methods.

VI. Check air balance tube

During printing, if you find some abnormal cases, such as bad output, ink drip out on paper, then you need to check the air balance tube to see if exist ink. If yes, please do according to the manual of "ink pump out from balance tube”.

VII. Warnings

1.During printing, please do not take cartridges over than the printer. Please keep ink tank and printer in the same level.

2.During printing, do not inverse, lift up or lower ink tanks.

3.Please do not block up ink tanks for curiosity or for fear of less ink

4.Use CISS at clean environment and within the temperature range 15-35

degrees.

VIII. Product Warranty

INKSYSTEM warrants its products to be free from defects in material or workmanship. Rarely the equipment partly or completely fails within the warranty period. In these cases we do everything possible to ensure that our customers are satisfied with the purchase.

The INKSYSTEM CISS installation is free in any of the representative offices.

INSTALLATION MANUAL ON CISS FOR PRINTER CANON IP 1500