Atlona AT-PROHD88M-SR user manual Very Important

Page 8

VERY IMPORTANT:

If one of your Output devices is a projector or a display with a unique resolution your sources/source which are/is connected to the switch might not send out a proper video format which will result image to intermit or signal not show up on the display.

Solution: Make sure your DIP switch configuration is either DIP # 1 or # 2. Route the device in question

to the output in question. After that’s done, please perform the following operation: (Simultaneously press and hold the “Output # (in question) and “FN Key” buttons for three seconds). You shall see the following message to appear on your LED display: “MIX OK”

If you receive a “MIX FL” – please try this operation again.

IR REMOTE CONTROL

The AT-PROHD88M-Sr comes with 16 button IR remote control, which could be used to control the switcher when pointing at it or controlling the switcher from a remote location by pointing the remote control to the IR Eye connected to the HDMI receiver.

For users who would like to use a 3rd part IR remote control or IR remote sys- tem, we recommend either learning IR codes off the remote or copying and pasting the IR HEX code into the remote control software. The file with HEX codes could be found on Atlona website under downloads for AT-PROHD88M- SR.

There are 2 scenarios which codes to use:

•User will need to learn all 64 x codes in order to control each location when pointing at the switcher

•User will only need to learn 8 x codes if there will be a separate remote for each remote location

Note: The switcher can only accept and route IR signal which doesn’t exceed 38 KHz. In other words, if you are trying to send IR signal from the remote location though out HDMI receiver and the IR signal is higher than 38 KHz, the IR signal will not pass though.

VERY IMPORTANT:

When connecting IR receivers and IR emitters, be very careful as if they are reversed the IR Eye will burn-out and also may damage the IR module inside of the switch and Receiver.

TX – Connects to the Switch

RX – Connects to the HDMI Receivers

www.atlona.com toll free: 1-877-536-3976

 

8

For International: 1-408-962-0515

 

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Atlona Table of Contents Introduction Main Unit Front PanelHdmi Receiver 8 x Receivers included Rear PanelOFF Auto Edid Management DIP # For International Very Important RS232 Cable Wiring RS232 ControlFor International For International Safeguards PrecautionsLimited Warranty Atlona Product Registration

AT-PROHD88M-SR specifications

The Atlona AT-PROHD88M-SR is a versatile and robust HDMI matrix switcher designed to meet the needs of professional audio-visual systems. This high-performance device allows for seamless switching between multiple HDMI sources to a variety of displays, making it a crucial component in a range of applications such as corporate environments, educational institutions, and entertainment venues.

One of the standout features of the AT-PROHD88M-SR is its capacity to support up to eight HDMI inputs and eight outputs. This matrix configuration provides users with the flexibility to route any input to any output, enabling dynamic and efficient management of diverse audio-visual content. With support for resolutions up to 1080p, the switcher delivers crisp and clear video quality that meets the standards required for high-definition presentations and broadcasts.

The device incorporates advanced EDID management, which allows for optimal compatibility between the input sources and output displays. This ensures that users can experience uninterrupted video playback regardless of the equipment being used. Additionally, the AT-PROHD88M-SR supports HDCP compliance, allowing for secure playback of protected content, essential for professional environments.

Another notable characteristic of the Atlona AT-PROHD88M-SR is its integration of RS-232 and TCP/IP control options. This capability allows for seamless integration with existing control systems, enabling users to operate the matrix switcher via remote control interfaces or automated systems. This versatility enhances the user experience by providing multiple control methodologies that cater to diverse operational preferences.

Furthermore, the unit features an intuitive front panel with LED indicators, making it easy to monitor input and output status. For added convenience, the product comes with a user-friendly GUI for more complex setups and customization, allowing users to configure settings tailored to their specific needs.

Finally, the AT-PROHD88M-SR is designed with reliability in mind. Its robust construction ensures longevity, while the inclusion of a built-in cooling system prevents overheating, even during extended use. Overall, the Atlona AT-PROHD88M-SR stands out as a reliable and powerful solution for managing high-quality video signals in any professional setting, making it a valuable asset in the audiovisual industry.
Top Page Image Contents