Fender Rumble, Front Panel Functions

ENGLISH

6 Fender® Rumble™ 25

Your new Rumble™ 25 offers affordable

Fender® tone and quality:

•All front panel controls and jacks.

•Compact size ideal for rehearsal and backstage warm-up.

•Headphones jack for private listening or output to sound equipment.

•CD IN RCA input jacks for use with a portable CD or Tape player, drum machine, etc.

•Deltacomp™ adaptive limiter virtually eliminates power-amp distortion for clear tone and punchy response.

Fender® amplifiers are the result of over 50 years experience contributed by dedicated engineers and musicians in studios and on stages around the world.

Fender®, The Sound That Creates Legends.

Front Panel Functions

1.INPUT 1- Input jack for most bass guitars.

2.INPUT 2- Input jack for bass guitars with active pre-amps (attenuated –6dB).

3.VOLUME – Adjusts the loudness of the amplifier.

4.BASS – Adjusts the low-frequency level.

5MID – Adjusts the middle-frequency level.

6.TREBLE – Adjusts the high-frequency level.

7.CD IN – RCA input jacks for use with a portable CD or tape player, drum machine, etc. These input jacks are not affected by the amplifier’s volume or tone controls. Adjust the signal at the source.

8.PREAMP OUT – Connect this jack to the input of an external effects device.

9.POWER AMP IN – Connect this jack to the output of an external effects device.

10.HEADPHONES – Output jack for standard stereo or mono headphones. Using this jack automatically disconnects the speaker. This jack can also be used as an unbalanced line output by using either a stereo or mono 1/4" phone plug connection.

11.POWER INDICATOR – Illuminates when the unit is ON.

12.POWER SWITCH – This switch turns the unit ON and OFF.