IBM 755 manual Sas

Page 24

Power cords

Two power cords are required.

The Power 755 requires 200-240 V power cords for all configurations.

System memory

A minimum 128 GB of memory is required on the Power 755 system.

Eight memory DIMM slots are on a processor card. The maximum system memory is 256 GB with four processor cards.

Different system memory feature numbers may not be mixed on the same processor card. However, a system with more than one processor card may use different memory feature numbers on the same system.

Memory must be installed in groups of one feature (two DIMMs), two features (four DIMMs), or four features (eight DIMMs) per processor card. Installation of three features (six DIMMs) is not permitted.

It is generally recommended that memory be installed evenly across all processor cards in the system. Balancing memory across the installed processor cards allows memory access in a consistent manner and typically results in the best possible performance for your configuration. However, balancing memory fairly evenly across multiple processor cards, compared to balancing memory exactly evenly typically has a very small performance difference.

Plans for future memory upgrades should be taken into account when deciding which memory feature size to use at the time of initial system order.

Figure 1. Memory features

 

 

 

Feature

Minimum

Maximum

Feature

number

quantity

quantity

8 GB 1066 MHz

4526

0

16

(2 x 4 GB RDIMMs)

 

 

 

16 GB 1066 MHz

4527

0

16

(2 x 8 GB RDIMMs)

 

 

 

Note: The 8 GB memory feature (#4526) is planned to be available on March 16, 2010.

Drawer/tower attachment:

EXP12S SAS DASD Expansion Drawer (#5886)

Feature number 8340 supports one feature number 5886 drawer directly off the system unit's SAS port. EXP12S drawers are attached to a PCI-X or PCIe SAS adapter via SAS cables.

A system maximum of 13 is allowed.

The following list shows I/O drawers that are supported or available on the 8236 machine type and the correct interface to use for each of the drawers.

 

 

Order

 

Feature

Description

Status

Interface

5886

Exp 12S SAS

 

 

 

Disk Drawer

Available

SAS

Maximum number of attached I/O drawers per system:

Power 755

Feature (32-core)

IBM United States Hardware Announcement 110-008

IBM is a registered trademark of International Business Machines Corporation

24

Image 24
Contents Table of contents Key prerequisites Planned availability date DescriptionFor more information, visit Minimum defined configuration, if no choice is made, is EXP 12S SAS Drawer #5886Reliability, availability, and serviceability RAS features Reliability, fault tolerance, and data correctionMemory error correction extensions Fault monitoring functionsRedundancy for array self-healing Mutual surveillancePOWER7 processor functions POWER7 single processor checkstoppingAvailability enhancement functions Partition availability priorityServiceability Service Interface First Failure Data Capture and Error Data AnalysisStand-alone diagnostics Service labelsLocation diagrams Error Handling and Reporting Service ProcessorCall Home IBM Electronic Services BenefitsStatement of general direction Product number E8C 5774 3m 14-Ft 3PH/24A Power Cord 8236 Inch racks Safety Information PublicationsServices Physical specificationsTechnical information Specified operating environmentNoise level and sound power Hardware requirementsSoftware requirements Limitations 110-008SAS AIX Linux DVD-RAM Sata IBM Electronic Services Planning informationCable orders Warranty period Warranty serviceTerms and conditions IBM Global FinancingWarranty service upgrades Maintenance Services Usage plan machine IBM hourly service rate classification Field-installable featuresModel conversions Machine installation Graduated program license charges applyPrices Educational allowanceAdptr AA E8C 3687 Both PCI Full Width Keyboard -- USB, Danish, #159 IOP E8C US English New features Existing featuresMeter SAS Cable Virtual USB, Spanish USB, Russian Optional 8XDIMMS Kapalua Order now TrademarksTerms of use