IBM 6C1, 6E1, 610 manual Surveillance, Dial-Out call home, and dial-in, Service processor restart

Page 31

￿Machine Check Interrupt.

￿Operating System Hang (Surveillance Failure).

￿Operating System Failure.

Surveillance

The service processor, if enabled through service processor setup parameters, performs a surveillance of AIX through a heartbeat mechanism. If there is no heartbeat within the time-out period, the service processor does the following:

￿Creates a system reset to allow an AIX dump to occur.

￿Upon receiving a reboot request (either after the dump or immediately, if dump is not enabled), the service processor captures scan debug data for the system.

￿Reboots the system.

Dial-Out (call home), and dial-in

If enabled, the service processor can dial a pre-programmed telephone number to report errors. If enabled, it is also possible to access the service processor remotely through a modem connection. When the service processor is in standby mode (because the system is powered off or an error occurred), the service processor monitors an incoming phone line to answer calls, prompts for a password, verifies the password, and remotely displays the standby menu. The remote session can be mirrored on the local ASCII console if the server is so equipped and the user enables this function.

Processor and memory boot time deconfiguration

As described previously, processors can be dynamically deconfigured by the system. It is also possible to deconfigure processors and also memory with menus of the service processor for benchmarking reasons. For further information, refer to the IBM ^pSeries 610 Models 6C1 and 6E1 Service Guide, SA38-2538.

Fast boot

This feature, activated after the first system is brought up, allows you to select the IPL type, mode, and speed for your boot capabilities using service processor menus. Selecting fast boot results in several diagnostic tests being skipped and a shorter memory test being run. Therefore, the startup process is faster, but possible problems might not be discovered at startup.

Service processor restart

The service processor design for the p610 Models 6C1 and 6E1 includes the ability to reset the service processor. This enables the system firmware to force a hard reset of the service processor if it detects a loss of communication. Since this would typically occur while the system is already up and running, the service processor reset will be accomplished without impacting system operation.

Boot to SMS menu

The boot mode menu allows someone to select other things to boot to the SMS menu. This function provides booting into the SMS menu without pressing a key. This function is useful because it is not necessary to wait in front of the system and press F1 (graphic display) or 1 (ASCII terminal) at the right moment.

Chapter 3. Availability, investment protection, and expansion

23

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Volker Haug Scott Vetter IBMPage International Technical Support Organization First Edition October Contents Page Team that wrote this Whitepaper PrefaceComments welcome General description Minimum and optional featuresPage PSeries 610 Model 6C1 package layout Physical packagePSeries 610 Model 6E1 package layout Enterprise racksIBM RS/6000 7014 Model T42 Enterprise Rack IBM RS/6000 7014 Model T00 Enterprise RackRack mounting rules for Model 6C1 IBM 7316-TF1 Flat Panel Display Console VGA switchCable management arm for Model 6C1 Cable management armPage Architecture and technical overview Processor and cache POWER3-II architecture1 L1 and L2 cache Copper and Cmos technology Processor boot time deconfiguration within an SMP systemProcessor deallocation Processor clock rate State enable means that processor 0 is enabledProcessor part numbers MemoryMemory interchange with other systems Memory boot time deconfigurationSystem bus PCI-bus, slots, and adaptersInternal storage attachments 1 32-bit versus 64-bit PCI slotsLAN adapters Graphics acceleratorsMiscellaneous Configuration options, a combinationInternal devices Boot options and limitationsBoot support and limitations of storage adapters Fast bootSoftware requirements SecurityReliability, availability, and serviceability RAS features High availability solutionRemark x means available System indicator panel Light Path diagnosticsAutomatic reboot Service processorSurveillance Processor and memory boot time deconfigurationService processor restart Boot to SMS menuHot plug fans Hot plug power suppliesSerial port snoop Scsi hot swap manager Hot plug taskHandheld based systems management Special notices AIX AIX 5L IBM trademarksReferenced Web Sites System PublicationsMail address How to Get IBM RedbooksRelated Publications

610, 6C1, 6E1 specifications

IBM 6C1, 6E1, and 610 models are part of IBM's legacy mainframe computing systems, renowned for their reliability, scalability, and security features. These systems have been foundational to managing enterprise-level tasks in various industries, including finance, healthcare, and government sectors.

One of the standout features of the IBM 6C1 is its advanced processing capabilities. Equipped with powerful processors, it enables users to handle heavy workloads while maintaining high performance and low latency. This model integrates IBM's latest microarchitecture technology, allowing for faster data processing and improved efficiency.

The IBM 6E1 model emphasizes enhanced memory and storage capabilities, which are crucial for running large-scale applications. With increased RAM options and high-speed access to storage solutions, users can expect improved multitasking capabilities and seamless operations for resource-intensive programs. This model also supports advanced virtualization technologies, making it easier for organizations to deploy multiple virtual machines on a single physical server, thus optimizing resource utilization.

The IBM 610 model is particularly known for its superior security features. With built-in encryption and data protection mechanisms, the 610 is designed to safeguard sensitive information against emerging cyber threats. This model adheres to stringent compliance standards, making it an ideal choice for organizations that handle critical data and require robust regulatory compliance.

Another notable characteristic across these IBM models is their reliability and uptime. IBM's engineering ensures that these systems have undergone rigorous testing to guarantee durability and performance stability. High availability configurations allow for continuous operation, minimizing downtime and ensuring business continuity.

In terms of connectivity, the IBM 6C1, 6E1, and 610 models support a wide range of networking protocols and interfaces. This flexibility allows organizations to seamlessly integrate these systems with existing IT infrastructure and modern cloud solutions.

Moreover, IBM provides comprehensive support and maintenance services for these models, ensuring that organizations can resolve issues promptly and keep their systems running optimally.

In conclusion, the IBM 6C1, 6E1, and 610 mainframe models offer a balanced combination of processing power, memory capacity, security features, and reliability. Their advanced technologies make them ideal for organizations looking to leverage mainframe capabilities for mission-critical applications and data management. With their proven track record, these IBM models continue to be a vital part of enterprise computing environments worldwide.
Top Page Image Contents