TRENDnet TVIP612WN manual Click Next, Select By using wireless and then click Next

Page 7

17.Select your wireless network from the Available AP dropdown list. If your wireless

network does not appear, manually enter the SSID of your wireless network. If you have

Encryption enabled, select the Authentication, select the Encryption and enter your Key. Then click Next.

18. Click Next.

19.Please wait while the settings on your cameras are being saved.

20. Select By using wireless and then click Next.

21.Disconnect the RJ-45 cable. Verify that the LINK (RED) LED is lit and then click Next.

Note: The TV-IP612WN will not work wirelessly until you disconnect the Ethernet cable from the back of the camera.

5

Image 7
Contents TV-IP612WN Table of Contents Before You Start Package ContentsClick Setup Wizard Hardware Installation and ConfigurationClick Close Page Click Next Select By using wireless and then click NextClick Install. Internet Explorer Your installation is complete Register Your Product When I click on Live View the image does not load? TroubleshootingForgot my password. What should I do? Change the channel Wireless TipsAssign your network a unique Ssid Do not turn off the Ssid broadcastPage Page Page Page Page Copyright 2010. All Rights Reserved. TRENDnet