Installation | TRENDnet TEW-210APB guide

3. Installation

1.Mount the Access Point firmly to the wall or proper location that is determined during the site survey.

2.Make sure the antennas are in a vertical position (if not, rotate over 90 degrees).

3.Insert the power connector.

4.Attach the UTP Ethernet cable to the Access Point.

At the front of the Access Point you will see three LEDs.

If all goes well, the middle LED (power) and the lowermost LED(LINK) will fire and uppermost LED(ACT) will flash whenever there is traffic on the respective networks which is at least ten times per second for the wireless LAN because of so-called ‘beacons’.

You can reset the Access Point’s settings to factory defaults by pushing a paperclip in the little hole next to the power connector.

TEW-210APB specifications

The TRENDnet TEW-210APB is a versatile and reliable wireless access point designed to enhance your network infrastructure. With its ability to bridge the gap between wired and wireless connectivity, this device offers a seamless solution for expanding your network coverage.

One of the main features of the TEW-210APB is its compliance with the IEEE 802.11g standard, which allows for wireless transmission speeds of up to 54 Mbps. This makes it suitable for various applications, including streaming media, online gaming, and regular browsing. The device also boasts backward compatibility with the 802.11b standard, ensuring that older devices can still connect effortlessly.

The TEW-210APB supports multiple operating modes, including Access Point, Bridge, and Client Mode. In Access Point mode, it allows multiple wireless clients to connect to a wired network, while Bridge mode can connect two wired networks wirelessly. Client Mode enables the device to connect a wired device to a wireless network, providing flexibility in different networking scenarios.

Security is a vital aspect of any wireless network, and the TEW-210APB doesn't disappoint. It offers robust security features, including WEP, WPA, and WPA2 encryption, ensuring data protection against unauthorized access. In addition, the device supports MAC address filtering, allowing users to control access to the network based on specific device addresses.

Another key characteristic is its robust antenna design. The TEW-210APB comes equipped with two detachable antennas, providing better signal strength and coverage in larger areas. This feature is particularly beneficial for businesses and households with multiple floors or obstacles that could hinder connectivity.

Installation and management are made easy with the user-friendly web management interface. Users can quickly configure settings, monitor network performance, and manage connected devices. The device also supports Power over Ethernet (PoE), simplifying installation by allowing the access point to receive power through the Ethernet cable, eliminating the need for additional power outlets.

In summary, the TRENDnet TEW-210APB is an exceptional choice for those looking to enhance their wireless connectivity. With its impressive range of features, including multiple operating modes, robust security options, and strong antenna performance, it provides a scalable solution for both home and office environments. Whether expanding network coverage or integrating devices, the TEW-210APB stands out as a reliable access point.