![](/images/new-backgrounds/1185810/18581025x1.webp)
¾Encryption Mode:
There are two kinds of encryption mode, WEP encryption and
¾Authentication Mode:
Open System: with the same WEP key between the stations, the stations don’t need to be authenticated, and this algorithm was set to default.
Shared Key: with the same WEP key between the stations in this Authentication algorithm, this type will use packets with encryption by transferring a challenge text which will be acknowledge by both side of the stations. In order to choose which authentication algorithm will be used, you must know which one the station supports this algorithm first.
It is recommended to select “Auto” if you are not familiar with the setting.
¾Default Key (Key 1 ~ Key 4):
You can type the key that you want to use from Key#1 to Key #4, and the key that you type will be the encryption between the stations that you connected with.
¾Key Length, Key Format and WEP Key:
If you select 64bit in Hex format, you must type 10 values in the following range (0~F, hexadecimal), or 64bit in ASCII format, you must type 5 values in the following range (0~9, A~Z and a~z Alphanumeric).
If you select 128bit in Hex format, you must type 26 values (0~F, hexadecimal), or 128bit in ASCII format, you must type 13 values in the following range (0~9, A~Z and a~z Alphanumeric).
Be sure that the USB Adapter and the wireless station were set in the same key.
Note: After all the settings are completed, click Apply to save the setting.
8