TRENDnet TK-423K manual Operation, Hot-Key command = ScrLk + ScrLk + Command keys

3. Operation

Note: To switch between computers, you can use the front-panel push buttons or the Hot Key commands.

LED Indicators

Red LED light: KVM cable is connected and PC is powering the KVM switch.

Green LED light: Indicates the selected PC port is active, whether the computer is turned on or off.

Push Buttons

Press the push buttons to switch between computers.

Hot-Key Commands

A keyboard hot-key command consists of three keystrokes:

Hot-Key command = ScrLk + ScrLk + Command key(s)

After pressing the ScrLk key, you have 2 seconds to press the ScrLk key again. You then have another 2 seconds to press a command key. If you do not press a key within 2 seconds, the switch will exit hot-key mode.

To select a specific PC port:

Select PC = ScrLk + ScrLk + X x = 1~4 for PC channel number

For a list of all the Hot-Key commands, please see the Quick Reference Sheet.

4

English