Star Micronics TSP2000 user manual Releasing a Locked Cutter

Page 21

(4)Position the roll paper straight and close the printer cover gently.

Note 1: Make sure that the paper is positioned straight. If the printer cover is closed with the paper skewed, a paper jam may result.

Note 2: Lock the printer cover by pressing on the center of the cover. If any part of the cover other than the center is pressed, the cover may not be locked properly. This may sometimes disable printing.

(5)Set the power switch to on to turn on power to the printer. Make sure that the ERROR LED is not lit.

Note: While the ERROR LED is lit, the printer will not accept any commands such as the print command, so make sure that the printer cover is locked properly.

7-3. Releasing a Locked Cutter

If the auto cutter locks up or fails to cut the paper, follow the steps below.

Caution

Since working on the cutter may be dangerous, be sure to turn off the printer first.

(1)Set the power switch to OFF to turn off the printer.

(2)Slide off the front cover to reveal the auto cutter.

(3)Remove any jammed paper.

Note: Be careful not to damage the printer while removing any jammed paper.

Since the thermal print head is particularly sensitive, be sure not to touch it.

Auto cutter

Front cover

ENGLISH

– 17 –

Page 20 Page 22
Image 21
Page 20 Page 22
Contents TSP2000 Series EC Council Directive 89/336/EEC of 3 May Table of Contents Appendix D Serial Interface Parts Identification and Nomenclature Choosing a place for the printer Consumable Parts and AC Adapter Interface Cable Ferrite Core Installation Connecting Cables and AC AdapterConnecting the Interface Cable Connecting to a Peripheral Unit Cm maximum Fastener Pull and cut Connecting the Optional AC Adapter Turning Power On Power LED green LED Paper Feed SwitchError LED red LED Control PanelLoading New Roll Paper Loading PaperPaper Removing Remaining Paper Near-end Sensor Diameter of remaining paper a Screw position Preventing and Clearing Paper Jams Preventing Paper JamsRemoving Paper Jam Releasing a Locked Cutter Moving blade Check window Test Print Method Producing a Test PrintHexadecimal Dump Periodical Cleaning Cleaning the Thermal HeadCleaning the Paper Holder Table DES Matieres Identification des pièces et nomenclature Emplacement de l’imprimante Consommables et adaptateur secteur Câbles de connexion et adaptateur secteur Câble d’interface Installation du tore de ferriteConnexion du câble d’interface Raccordement d’un appareil périphérique Cm maximum Attache Tirez et coupez Connexion de l’adaptateur secteur optionnel Mise sous tension de l’imprimante DEL d’alimentation Power DEL verte Panneau des commandesDEL d’erreur Error DEL rouge Touche d’avance de papier Paper FeedChargement d’un rouleau de papier neuf Chargement du papierPapier Retrait du papier Capteur de fin de rouleau Diamètre du papier restant a Position de la vis Correction de bourrages de papier Prévention des bourrages de papierLibération d’une unité de découpage bloquée Unité de découpage automatique Couvercle avant Test d’impression Exécution d’un test d’impressionVidage hexadécimal Nettoyage Nettoyage de la tête d’impressionNettoyage du support de papier Français Inhaltsverzeichnis Beschreibung und Bezeichnung der Geräteteile Wahl eines Aufstellungsorts für den Drucker Verbrauchsteile und Netzteil Schnittstellenkabel Anbringen des Ferritkerns Anschlußkabel und NetzteilAnschließen des Schnittstellenkabels Anschluß an ein Peripheriegerät Maximum 5 cm Kabelbinder Ziehen und Abschneiden Anschließen des optionalen Netzteils Einschalten Fehler-LED Error rote LED Netz-LED Power grüne LEDBedienfeld Papiereinzugknopf Paper FeedEinlegen einer neuen Papierrolle Einlegen von PapierPapier Entfernen des restlichen Papiers Papiervorrat-Sensor Vorsichtsmaßregeln Verhindern und Beheben von Papierstau Verhindern von PapierstauBeheben von Papierstau Achtung Freigeben eines gesperrten SchneidmessersAutomatisches Schneidmesser Frontabdeckung Testdruck-Verfahren Erstellen eines TestdrucksSedezimaler Datenausdruck Regelmäßige Reinigung Reinigen des ThermalkopfesReinigen des Papierhalters Deutsch Indice Identificazione delle parti e nomenclatura Scelta di un luogo per la stampante Parti soggette a consumo e trasformatore CA Cavi di collegamento e trasformatore CA Cavo interfaccia Installazione dell’anello di ferriteCollegamento del cavo interfaccia Collegamento ad un’unità periferica Cm massimo Fascetta di fissaggio Collegamento del trasformatore CA opzionale Accensione Spia Error LED rosso Spia Power LED verdePannello di controllo Interruttore Paper FeedCaricamento di un nuovo rotolo di carta Caricamento della cartaCarta Rimozione della carta rimanente Sensore di rilevamento fine carta Attenzione Eliminazione degli inceppamenti della carta Prevenzione degli inceppamenti della cartaCautela Rilascio della taglierina bloccataTaglierina automatica Coperchio anteriore Metodo per la stampa di prova Produzione di uno stampato di provaScaricamento esadecimali Pulizia periodica Pulizia della testina termicaPulizia del comparto carta Italiano General Specifications Appendix a SpecificationsAuto Cutter Specifications Print SpecificationsPower Supply InterfaceReliability Environmental RequirementsAppendix B Dip Switch Setting DIP-SW Serial Interface TypeParallel Interface Type Appendix C Parallel Interface Table of Connection Signals for Each ModeDuring Reverse mode IN/OUT Function for Compatibility ModeAppendix D Serial Interface RS-232C ConnectorCable Connections Electrical CharacteristicsAppendix E Periheral Unit Drive Circuit Peripheral Drive ConnectorOverseas Subsidiary Companies Star Micronics AMERICA, INC

TSP2000 specifications

The Star Micronics TSP2000 is a highly regarded thermal receipt printer engineered for efficiency and reliability, making it an ideal choice for a wide range of retail and hospitality applications. The printer stands out for its combination of advanced features, robust technologies, and a user-friendly design.

One of the main features of the TSP2000 is its lightning-fast printing speed. Capable of delivering receipts at a speed of up to 250 mm per second, it drastically reduces customer wait times, improving overall service efficiency. This speed is complemented by its high-quality printing capability, with a resolution of 203 dpi ensuring that text and graphics are crisp and clear.

The TSP2000 incorporates advanced connectivity options to accommodate various business needs. It supports USB, Ethernet, and Bluetooth interfaces, allowing for easy integration with different systems and devices. This versatility ensures that it can seamlessly fit into existing setups, whether in a bustling retail environment or a lively restaurant.

Another key characteristic of the TSP2000 is its compact design. Its sleek aesthetic makes it suitable for environments where space is at a premium. Additionally, it is lightweight, which aids in easy handling and installation, whether mounted on a counter or a wall.

The printer is designed with user convenience in mind. The drop-in and print paper loading feature simplifies the process of changing rolls, reducing the time and effort required for maintenance. A status indicator light provides real-time updates on the printer’s status, allowing operators to quickly assess any issues that may arise.

Durability is another hallmark of the TSP2000. Constructed to withstand the rigors of daily use, it boasts a long lifespan and reliable performance even in high-traffic settings. Star Micronics also offers an extensive warranty, providing peace of mind for business owners.

Finally, the TSP2000 is compatible with Star’s unique technology called "Star Cloud Services," which enhances management and connectivity options. This cloud-based solution provides remote access to printing diagnostics and management, making it easier for businesses to monitor and manage their systems efficiently.

In conclusion, the Star Micronics TSP2000 is a feature-rich thermal receipt printer that excels in speed, connectivity, and ease of use. Its robust design and compatibility with advanced technologies make it a top choice for businesses looking to enhance their printing solutions while providing excellent service to their customers.
Top Page Image Contents