Star Micronics RS232 manual Outline

Page 5

1. OUTLINE

The TSP200 series is ideal for printing text, bar code and graphics.

The TSP200 series has the following features:

1.extremely quiet and fast printing (maximum 50 mm/sec.) using the direct line thermal printing method

2.support many bar code types

(UPC-A, UPC-E, JAN/EAN-8, JAN/EAN-13, CODE 39, IFT 2 OF 5, CODE 128, CODE 93, NW-7)

3.dual interfaces (RS232C, Parallel)

4.memory switches that enable wide selection of printer default settings

The printer has two different software modes which can be selected using the DIP switch.

(Factory setting: Star Mode)

Star Mode: DIP switch 1-7 ON

This mode is compatible with Star Receipt printers, such as the SP300 and SP200 series.

ESC/POS Mode: DIP switch 1-7 OFF

This mode is compatible with the printers supporting ESC/POS command.

ESC/POS is a trademark of Seiko Epson Corporation.

For improvement purposes, the descriptions and specifications in this manual are subject to change without notice.

– 1 –

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Thermal Printer TSP200 Series Programmer’s Manual Page Table of Contents Page Outline DIP switch array Memory SwitchDIP Switch OFF DIP switch #1 Factory settings of DIP switch 1 are all onLED SwitchesSwitch Operation Combined Switch Operation DTR or XON/XOFF mode Selected by DIP Interface SpecificationsSwitch Asynchronous serial interfaceInterface Circuit Output DTR, FAULT, TXD, RTSRS-232C Interface Input RXD, DSRConnectors and Signal Names RTS OUT Interface Connections Data Protocol DTR modeBytes when the buffer size is set to 45 bytes RXD OFF Line This mode is accessed when DIP switch 1-6 is set to OFF ON/X-OFF modeInterface Timing Parallel InterfaceParallel Interface Connector Is 1 LOW is Goes LOW to trigger data readPrinter outputs this pulse for approxi Mately 9μs to indicate that data read isPeripheral Unit Drive Circuit Page Drive output 24V, max .0 a Drive circuit Recommended drive circuit is shownRecoverable Errors Power Lamp Flashing On-Line Automatic Recovery Power Lamp Flashing On-Line Lamp OnType of buzzer sound only Star mode P 50ms Pi 100ms Fatal Error Power Lamp Flashing On-Line Lamp FlashingCommands to Select Characters Star Mode Command SummaryDetails of each command are shown in the following sections Commands to Move the Print Position Commands to Set the Page FormatCommands to Print Download Characters Commands to Print Dot GraphicsCommands to Control Peripheral Devices Commands to Control Auto CutterCan Other CommandsSelect zero style Command SpecificationJAN/EAN-13 Code Select bar code printingDk RS Narrow wide Dots Code 39, NW-7, ITFValue of k is optional, and the maximum Digits maximum in modeValue also differs according to the modes If the data is number of an odd digits, 0 isControl codes Character codesHEX HEX N1 n2 Cancels highlight printing Cancel highlight printingCancel inverted printing Cancels inverted printingSelect emphasized printing Cancels the bottom margin Cancel bottom marginSet page length in lines Set bottom marginHEX Line feed This command is ignored when CR code is invalidCarriage return Feed paper n linesVertical tab Space setting for lines is not changedStop and moves the print position to the left margin Is at or below the last vertical tab stopSet vertical tab stops One time n/4 mm backfeedOne time n/8 mm feed HEX Print normal density graphics We will create the design below using a bit image Print high density graphics ESC ∙ ∙ ∙ Dot positionData Binary Hexa Decimal D1...d n1+n2*256*3 Print fine density graphicsDefine download character Delete a download character ESC HEX Using 10ms units Control peripheral device #1 Other than standard 200 ms pulse time and delay timeDefine drive pulse width for peripheral device #1 Escbel n1Partial-cut command to the auto cutter Full-cut command to the auto cutterOr ESC d Or 1BError Cancel last line & Initialize printerSet select mode When the printer receives a DC1 code, the deselect mode isAlways Set memory switchN1n2n3n4 LF NUL Initialize printer Always 0 DefaultESC @ EnquiryStatus byte Reset the printer hardwareControl CODES/ESC/POS Mode GS B Character Code Tables Star ModeCharacter table Normal Character table katakana Star Mode Character table IBM International Character Set ESC/POS Mode 0 PC437 USA, Standard Europe 1Katakana 2 PC850 Multilingual 3 PC860 Portuguese 4 PC863 Canadian-French 5 PC865 Nordic 255 Space International Character Set Automatic Cutter Memo Page Overseas Subsidiary Companies

RS232 specifications

Star Micronics RS232 is a versatile and widely used connectivity standard that enables seamless communication between peripheral devices and computers, particularly in point-of-sale (POS) environments. This technology is renowned for its robustness and reliability, making it a preferred choice for businesses in various sectors, including retail, hospitality, and healthcare.

One of the main features of Star Micronics RS232 is its ability to facilitate serial communication, allowing devices to exchange data one bit at a time over a single communication line. This enables simple and effective connections between devices like printers, cash registers, and barcode scanners. The standard typically operates at data rates ranging from 300 to 115200 bits per second, accommodating various application needs.

The RS232 interface is characterized by its 9-pin (DB9) or 25-pin (DB25) connectors, with the DB9 being the more commonly used in modern applications. It provides a straightforward plug-and-play experience, allowing devices to be easily connected and configured without extensive technical knowledge. This simplicity is particularly beneficial for retail staff who may not possess in-depth IT expertise.

Another significant aspect of RS232 technology is its point-to-point architecture. This means each connected device operates independently, enhancing overall system performance. Moreover, RS232 supports long-distance communication, with the ability to transmit data over cable lengths of up to 50 feet (15 meters), which is advantageous in larger retail settings.

In terms of compatibility, Star Micronics RS232 devices are designed to work seamlessly with various operating systems, including Windows, macOS, and Linux. This widespread compatibility ensures that businesses can continue to leverage their existing infrastructure without the need for costly upgrades.

Additionally, Star Micronics has incorporated advanced technologies into their RS232 products, such as built-in error checking and data control features. These enhancements help minimize data transmission errors and ensure that the information exchanged between devices remains accurate and reliable.

In summary, Star Micronics RS232 offers a robust set of features, including simple connectivity, point-to-point architecture, and compatibility with various systems. Its proven performance and reliability make it a trusted choice for businesses looking to enhance their operational efficiency and streamline their processes. As POS technology continues to evolve, the Star Micronics RS232 standard remains a foundational component for effective device communication.
Top Page Image Contents