Star Micronics NL-10 user manual Technical, Specifications

Page 33

CHAPTER 4

TECHNICAL
SPECIFICATIONS


Type of printer	Serial impact dot matrix
Print speed	120 characters per second
	(in draft Pica)
	30 characters per second
	(in NLQ Pica)
Printing direction	Bi-directional, logic seeking
	Uni-directional in dot graphics
Paper feed	14 lines/second
	(in case of form feeding)
	Sprocket and Friction feed
Paper type
Single sheets	5.5-8.5 inches wide
Continuous paper	4-10 inches wide
(Number of copies)	Original + 2 copies
Ribbon	Special cartridge ribbon
Size	400(W) x 336(D) x 104(H) mm
	15.7(W) x 13.2(D) x 4.1(H) inches
Weight	6kg (13.2lb.)
Power	120VAC + 10% 60Hz, approx. 65W
	220 VAC + 10% 50/60Hz, approx.

65W

240 VAC + 10% 50/60Hz, approx.

65W

Image 33

Contents NL-10 Self Declaration Special Message to the New Owner Page Table of Contents Page Where Shall WE PUT IT? Setting UP Your PrinterWhat have WE HERE? Page Page Page Page Page Memo Controls and Parts of the Printer Getting to Know Your PrinterPage Page While Turning on the Power Selecting and Loading Paper To align paper that is not in straight Raise the paper guide for loading single sheets Page Open the sprocket covers to expose the sprocket teeth Ready to run with sprocket-feed paper Adjusting the Print HeadAdjustment lever allows for different thicknesses of paper Memo Caring For Your Printer Cleaning the PrinterUse a screwdriver to pry open the cartridge Replacing the RibbonPage Replacing the Print Head Page Memo Technical SpecificationsMemo Index