1. Sensor Adjustment
This printer is equipped with the following three paper sensors:
• PE(Paper End)/BM(Black Mark) Sensor Detects presence of roll paper and black marks.
• NE(Near End) Sensor
Detects whether the roll paper is nearing its end.
•Presenter Sensor (TUP592 Only) Detects paper in presenter.
The aforementioned sensors can be adjusted as follows.
Presenter Sensor
PE/BM Sensor
NE Sensor
1.1Adjustment of the PE/BM Sensor
1.Turn the printer off and unplug the power cord.
2.Remove the screws. Then, remove the board chassis.
3.Using the tip of a ballpoint pen or a similar object, set the DIP switches as follows:
Screw | DIP Switch DSW1 |
Board chassis
- -