TRENDnet TEW-430APB manual FCC Radio Frequency Exposure statement, FCC Interference Statement

Page 3

FCC Radio Frequency Exposure statement

This Wireless LAN radio device has been evaluated under FCC Bulletin OET 65 and found compliant to the requirements as set forth in CFR 47 Sections 2.1091, 2.1093, and 15.247 (b) (4) addressing RF Exposure from radio frequency devices. The radiated output power of this Wireless LAN device is far below the FCC radio frequency exposure limits. Nevertheless, this device shall be used in such a manner that the potential for human contact during normal operation is minimized.

When nearby persons has to be kept to ensure RF exposure compliance, in order to comply with RF exposure limits established in the ANSI C95.1 standards, the distance between the antennas and the user should not be less than 20 cm.

FCC Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:

1.Reorient or relocate the receiving antenna.

2.Increase the distance between the equipment and the receiver.

3.Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.

4.Consult the dealer or an experienced radio/TV technician for help.

Export restrictions

This product or software contains encryption code that may not be exported or transferred from the US of Canada without an approved US Department of Commerce export license.

ii

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Page USA-FCC Federal Communications Commission statement Regulatory Information/disclaimersFCC Radio Frequency Exposure statement FCC Interference StatementExport restrictions CE Mark Warning Safety InformationProtection requirements for health and safety Article 3.1a CE in which Countries where the product may be used freelyTable of Content Overview of this User’s Guide PurposeUnpacking SetupFront panel Rear PanelLAN Link/ACT Hardware connections PowerConnect to the Switch/Hub Check the installationPage Login Login to the Wireless AP through WlanMain Screen of the Access Point Set Password WizardSet Wlan Connection Restart Set WEP EncryptionStatus Page Access Point Mode Basic SettingAP mode configuration WPA-PSK / WPA2-PSK AP Client mode Radius ServerRadius Server 2 optional AP Client mode configuration WPA-PSK / WPA2-PSK Single WDS group application WDS modeMultiple WDS group application WDS mode application Multiple WDS group WDS mode configuration for Example-2 AP+WDS mode Repeater mode Page WPA-PSK / WPA2-PSK IP Setting Advanced Setting Click Apply SecurityTools Physical and Environmental GeneralEMI Limited Warranty
Related manuals
Manual 11 pages 63.84 Kb Manual 17 pages 48.37 Kb

TEW-430APB specifications

The TRENDnet TEW-430APB is a versatile wireless access point designed to enhance network connectivity in both home and office environments. This device is engineered to deliver reliable performance, making it an ideal solution for expanding wireless coverage and ensuring stable internet access for multiple users and devices.

One of the standout features of the TEW-430APB is its support for both 2.4GHz and 5GHz frequency bands, allowing users to take advantage of dual-band wireless technology. This capability minimizes interference and improves overall network performance, with the 5GHz band providing increased speeds for bandwidth-intensive tasks such as streaming, gaming, and large file transfers.

The TEW-430APB supports the IEEE 802.11n wireless standard, which enables data transfer rates of up to 300Mbps. This high-speed capability is essential for households and offices with numerous connected devices, ensuring that users experience fast and uninterrupted connectivity. Additionally, the access point is backward compatible with 802.11b and 802.11g devices, making it a flexible option for a variety of setups.

Equipped with multiple SSID support, the TEW-430APB allows network administrators to create separate networks for different user groups. This feature is particularly beneficial for businesses that require secure guest access while maintaining the integrity of their internal network. Furthermore, the access point offers robust security features, including WPA/WPA2 encryption, which helps protect sensitive data from unauthorized access.

The TRENDnet TEW-430APB is designed for easy installation and management. Its user-friendly web-based interface allows for simple configuration and monitoring of network performance. The device also supports Power over Ethernet (PoE), which simplifies installation by enabling the access point to receive power and data over a single cable.

In summary, the TRENDnet TEW-430APB is a powerful access point ideal for expanding wireless networks in various settings. With its dual-band capabilities, high-speed data transfer, multiple SSID support, and enhanced security features, it effectively addresses the connectivity needs of modern users. Whether in a bustling office or a busy household, the TEW-430APB ensures that everyone stays connected with ease.
Top Page Image Contents