TRENDnet Super G Access Point Prepare for Installation, Verify Package Contents, Verify Equipment

English QIG

1. Prepare for Installation

Thank you for purchasing TRENDnet's TEW-450APB Super G Access Point

This guide will help you set-up your Access Point quickly and easily. Just follow the step-by-step instructions below, and enjoy the benefits of accessing the Internet without ever being tied down to wires! If you run into problems, please refer to the Troubleshooting section. If you need further technical support, please visit www.TRENDNET.com or call technical support by phone.

Verify Package Contents

Please make sure you have everything in the box:

Verify Equipment

Before setting up the Access Point, you should have:

1.A Computer with a Wired (RJ-45) or Wireless network card.

2.TCP/IP protocol installed on the Computer.

3.A Web Browser such as Internet Explorer (5.0 or higher) or Netscape Navigator (4.7 or higher).

4.A Hub or Switch connecting your existing wired network.

5.An RJ-45 Network Cable for connecting the Access Point to your network Switch.

1English