TRENDnet TPL406E2K manual Using the Powerline Utility, Powerline Utility System Requirements

Page 11

TRENDnet User’s Guide

To reconfigure an additional Powerline adapter to connect and use the encryption key of your existing Powerline network:

Note: Use the Sync button procedure below if you are connecting TRENDnet Powerline models TPL-303E, TPL-304E, TPL-308E, TPL-309E, TPL-311P, TPL-406E, or TPL-407E. If you are connecting to other TRENDnet Powerline models, please refer to the Appendix on page 23 for using the correct Sync button procedure.

1.Verify that all existing Powerline adapters are already installed and connected.

2.Push and hold the Sync button on one of the existing Powerline adapters connected to your Powerline network for 3 seconds and release it. The Power (PWR) LED will start blinking. This will initiate the Sync process on the existing Powerline adapter.

3.Within 2 minutes, push and hold the Sync button on the additional Powerline adapter for 3 seconds and release it. The Power (PWR) LED will start blinking. This will reconfigure your additional Powerline adapter to connect and use the encryption key of your existing Powerline network. All LEDs will turn off and turn back on and the Powerline (PL) LED will turn on the adapters are connected.

To reconfigure the encryption key and connect additional Powerline adapters to your existing Powerline network, repeat the steps above for each adapter.

TPL-406E / TPL-406E2K

Using the Powerline Utility

The Powerline Utility allows you to do the following:

•Create a customized encryption key for your Powerline network and apply it to multiple Powerline adapters at the same time.

•View the Powerline adapters connected to your network (using the MAC address) and the approximate connection quality and speed of each Powerline adapter.

•View and upgrade Powerline adapter firmware.

Note: Link speed displayed in the utility of your Powerline adapters to another through your electrical system is estimated. Actual link speed may vary.

Before installing and using the utility, please ensure the following:

•Write down the Device Password (DPW) (16-digit characters A-Z only) and MAC Address (12-digit characters a-f, A-F, 0-9) of each Powerline adapter as this will be required to change the encryption key for multiple Powerline adapters. See “Product Hardware Features” on page 2.

•Make sure your computer in which you are installing the utility is connected to your network and your Powerline adapters are also connected to your network.

•If you have changed your encryption key using the Sync button and you are creating a customized encryption key, it is required to reset all Powerline devices to factory defaults using the physical Reset button on your Powerline adapter first before using the utility. See “Product Hardware Features” on page 2.

•Please ensure that your Powerline adapters are already installed and connected and the Ethernet port on each adapter is connected to a device powered on.

Powerline Utility System Requirements

•Windows 7 (32/64-bit), Windows Vista (32/64-bit), or Windows XP (32/64-bit)

•Microsoft® .NET Framework 2.0 installed (Included with CD installation)

© Copyright 2012 TRENDnet. All Rights Reserved.

9

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Page Contents Product Overview TPL-406ETPL-406E2K Package ContentsFeatures Ethernet Port Product Hardware FeaturesDevice Label Color Sequence Definition ResetButton Action Function Sync Application Diagram Connect a Powerline adapter to your router Installing your Powerline AdaptersBefore you Install Add adapters to your network To extend your network using an additional Powerline adapterChange your default encryption key using the Sync button Securing your Powerline NetworkUsing the Sync button Add adapters using the Sync button Powerline Utility System Requirements Using the Powerline UtilitySoftware Installation TRENDnet User’s Guide Using the Utility Upgrade Firmware Powerline Utility OverviewDevice Name Device Password Connection Speed or Quality Link Rate Rename Enter PasswordSet Local Device Only Set All Devices Use Default Public NetworkEncryption Key Report System InformationRemote Device History Log AutoScan UXMA-UOUP-IQXJ-UTYN Click Enter PasswordTPL-406E / TPL-406E2K To rename the Powerline adapters TRENDnet User’s Guide Technical Specifications Troubleshooting Model Using the Sync Button with other TRENDnet Powerline modelsAppendix Overlapping Powerline networks Europe EU Declaration of Conformity Federal Communication Commission Interference StatementFCC Radiation Exposure Statement RoHSTRENDnet User’s Guide TPL-406E / TPL-406E2K Limited Warranty

TPL406E2K specifications

The TRENDnet TPL406E2K is a versatile powerline networking solution that enables users to extend their network over existing electrical wiring in their homes or offices. This innovative device is part of TRENDnet's Powerline 500 series, designed to make high-speed internet access more accessible by leveraging a building's power circuits. The TPL406E2K is an ideal choice for those looking to eliminate dead zones and connect devices in areas where traditional Wi-Fi signals struggle to reach.

One of the main features of the TPL406E2K is its impressive data transfer rate of up to 500 Mbps, which is suitable for streaming HD content, online gaming, and other bandwidth-intensive applications. The device uses advanced HomePlug AV technology, ensuring reliable communication between connected devices without interference from other networks. As a result, users can enjoy a stable and fast internet connection even in distant rooms.

The TPL406E2K comes equipped with two Ethernet ports, allowing users to connect multiple devices directly through wired connections. This feature is particularly beneficial for devices that require consistent speeds, such as consoles, smart TVs, or desktop computers. Additionally, the kit typically includes two adapters, making it easy for users to set up a robust powerline network across different locations within their premise.

Security is another notable aspect of the TPL406E2K. Each unit is designed with a simple push-button encryption feature, which allows users to secure their powerline network quickly. By pressing the encryption button on each adapter, users can safeguard their data transmissions from unauthorized access.

Installation of the TPL406E2K is straightforward, requiring no additional software or configuration. Users simply plug in the adapters into electrical outlets, and the devices automatically establish a secure connection, enabling seamless network access.

The compact and sleek design of the TRENDnet TPL406E2K also ensures that it won't be an eyesore in your home. Its energy-efficient operation ensures that the units consume minimal power, reducing overall electricity costs.

In summary, the TRENDnet TPL406E2K offers a reliable and efficient solution for extending network connectivity in challenging environments. With its high data transfer speeds, multiple Ethernet ports, easy installation, and robust security features, it's an excellent choice for anyone needing a durable powerline networking extension. Whether for streaming, gaming, or remote work, TRENDnet’s technology meets the demands of modern connectivity.
Top Page Image Contents