To recharge the Powerpack using a vehicle’s
12 V outlet:
1.If the inverter module is connected to the Powerpack, disconnect any devices plugged into the inverter and disconnect the inverter from the Powerpack.
2.If necessary, attach the vehicle power outlet adapter to the DC input cable. See Figure 4 on page 15.
3.Plug the DC input cable into the DC input port on the inverter module. Align the plug and port correctly. See Figure 4.
CAUTION: Reverse polarity damage
When plugging in the DC cable, ensure that the plug aligns with the DC cable port. Failure to do so will result in reverse polarity and a blown fuse.
4.Plug the AC Charger into the AC charger input on the Powerpack.
5.Plug the other end of the AC Charger into the inverter module.
28