Transition Networks NFXEXXX01 specifications USER’S Guide

USER’S GUIDE

N-FXE-xxx-01, 100Base-FX Fiber

Adaptor NIC Cards

•PCI-Express x1 Interface

•Available with SC, ST, LC multimode and single mode fiber connections

•Wake-on-LAN (WoL)

•Supports 802.1q VLAN tagging

100Base-FX Fiber Adapter NIC is a Fast Ethernet NIC that fully complies with all IEEE 802.3u and 100Base-FX standards. Two LED indicators (LINK/ACT and FDX) on the bracket will help to oversee board link activities and full-duplex status.

Fast Ethernet PCI-E 100Base-FX Fiber adapters support Preboot Execution Environment (PXE), Remote Program Load (RPL), and Bootstrap Protocol (BOOTP). Multi-Boot Agent (MBA) is a software module that allows your networked system to boot with the images provided by remote systems across the network.

Part Number	Fiber Port
N-FXE-ST-01	ST 1310 nm multimode, 2km (1.2 miles) std/low profile bkt
	PXE boot included*
N-FXE-SC-01	SC, 1310 nm multimode, 2km (1.2 miles) std/low profile bkt
	PXE boot included*
N-FXE-LC-01	LC, 1310 nm multimode, 2km (1.2 miles) std/low profile bkt
	PXE boot included*
N-FXE-SC5-01	SC, 1310 nm single mode, 5km (3.1 miles) std/low profile bkt
	PXE boot included*
N-FXE-LC5-01	SC, 1310 nm silngle mode, 5km (3.1 miles) std/low profile bkt
	PXE boot included*

*Typical maximum cable distance. Actual distance is dependent upon the physical characteristics of the network installation.

Installation	.2
Cable Specifications	.4
Technical Specifications	.5
Troubleshooting	.6
Contact Us	.7