Transition Networks MIL-SM802GAF, MIL-SM8TXAF2GPA user manual LED Indicators

Page 17

LED Indicators

The LED Indicators display real-time information of systematic operation status. The

following table provides descriptions of LED status and their meaning.

The LED indicators description of 8 10/100TX + 2 Gigabit Copper/Mini-GBIC Combo model

(MIL-SM8TXAF2GPA)

 

 

 

 

 

 

 

 

LED

Status

Description

 

 

 

 

 

 

 

 

 

 

Green

Power On

 

 

 

Power

 

 

 

 

 

 

OFF

No power inputs

 

 

 

 

 

 

 

 

 

 

Green

The port is supplying power to the

 

 

 

 

connected powered-device

 

 

 

FWD (port 1~8)

 

 

 

 

 

 

 

 

 

 

OFF

No powered device attached or power

 

 

 

 

supplying failed

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1000M

Green

The port is operating at speed of 1000M

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(RJ45 port 9~10)

OFF

The port is disconnected or not operating

 

 

 

 

at speed of 1000M

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Green

Connected to network

 

 

 

 

 

 

 

 

 

LK/ACT (port 1~ 10)

Blinking

Networking is active

 

 

 

 

 

 

 

 

 

 

OFF

Not connected to network

 

 

 

 

 

 

 

 

 

 

Green

The port is operating at speed of 100M

 

 

 

100M

 

 

 

 

 

OFF

The port is disconnected or not operating

 

 

 

 

 

 

 

 

at speed of 100M

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

10

Page 16 Page 18
Image 17
Page 16 Page 18
Contents MIL-SM802GAF Fax +1.952.941.2322 Transition Networks CE Mark Warning FCC WarningContents Web-Based Management Ring 103 Diagnosing LED Indicators 104105 108Introduction Gvrp FeaturesPage Vlan Software FeatureIgmp Dhcp Package Contents Front Panel Physical DimensionPage LED Indicators LK/ACT Rear Panel Attaching Rubber Pads Desktop InstallationPower On Network Application Small Workgroup Segment Bridge Segment Bridge application Console Management Login in the Console InterfaceCLI Management Exec Commands LevelConfigure parameters System Commands Set Commands Set ListGateway PasswordUsername Low IPIP address Portid Port Commands SetFull half 101001000autoValue Enable Disable Trunk Commands Set~65535 Group IDGroupID GroupID Port-listWorkport Vlan Commands Set TaggedVID List Trunk-link tagHybrid-link untag TagSeconds Spanning Tree Commands Set~61440 Stp-path-cost Forward-time seconds~200000000 Stp-path-priorityQOS Commands Set Mac / Filter Table Commands Set Igmp Commands SetPrioritylowestlowmid DlehighSnmp Commands Set V1v2cv3v1v2cv3 Authentication Password PrivacyCommunity Community-stringRead View Name Write View Name Notify View ExactPrifixView Name ExcludedIncludedRXTXBoth Port Mirroring Commands Set802.1x Commands Set Words Port IDNumber SecAuthorize Tftp Commands SetDisable reject accept Clientserverboth SystemLog, Smtp and Event Commands SetAccount Index Email addressLink-UPLink-DownBot Sntp Commands SetTimezone Start time End timeMinute 1st Ring Port 2nd Ring Ring Commands SetCoupling Port Control PortPreparing for Web Management System LoginAbout Web-based Management System Information IP Configuration Dhcp Configuration Dhcp Server Configuration Port and IP Bindings Dhcp Client EntriesTftp Update Firmware Tftp Backup Configuration Tftp Restore ConfigurationSystem Event Log Configuration System Event Log Smtp Configuration System Event Log Event Configuration Event Configuration interface Sntp Configuration Page Sntp Configuration interface IP Security User Authentication Port Statistics Port Control Port Trunk Port Trunk Aggregator settingPort Trunk Aggregator Information Port Trunk State Activity Port Mirroring Rate Limiting Vlan configuration Vlan configuration Port-based Vlan Vlan Port Based interface Button to modify existing Vlan group 802.1Q Vlan 802.1Q Configuration Group Configuration Rapid Spanning Tree Rstp System ConfigurationRstp System Configuration interface Rstp Port Configuration System Configuration Snmp ConfigurationTo switch to the selected Snmp version mode SNMPV3 Configuration Trap ConfigurationTo add context name. Click Snmp V3 configuration interface To add context name Click QoS Policy and Priority Type QoS ConfigurationRule Click COS Configuration Igmp ConfigurationTOS Configuration Port Base PriorityPage Igmp Configuration interface Ring To apply the configuration Security 802.1X/Radius Configuration802.1x Per Port Configuration Misc Configuration Static MAC Address MAC Address TableMAC Filtering All MAC Addresses All MAC Address interface Power over Ethernet Factory Default System Reboot Save ConfigurationNon-standard cables Faulty or loose cablesIncorrect connections Improper Network Topologies Diagnosing LED IndicatorsTechnical Specification Dram EMI Console Port Pin Assignments Appendix100BASE-TX/10BASE-T Pin Assignments VCC+ 111

8 10/100TX 1 10/100/1000T/10/100 SFP Combo with 4 PoE Injectors Managed Switch, 8 10/100TX 2 Gigabit Copper/SFP Combo with 8 PoE Injectors Managed Switch, MIL-SM8TXAF2GPA, MIL-SM802GAF specifications

Transition Networks offers robust and versatile solutions for industrial networking with its MIL-SM8TXAF2GPA and MIL-SM802GAF managed switches. Designed for critical applications, these switches are engineered to withstand harsh environments, making them ideal for military, transportation, and other demanding sectors.

The MIL-SM8TXAF2GPA model is equipped with eight 10/100TX Ethernet ports and one Gigabit copper/SFP combo port. It also features four Power over Ethernet (PoE) injectors, providing a reliable power source for connected devices such as IP cameras, access points, and VoIP phones. This capability reduces the need for additional power cabling, simplifying installation and maintenance.

Similarly, the MIL-SM802GAF switch offers eight 10/100TX ports complemented by two Gigabit copper/SFP combo ports. This configuration allows for flexible network design, enabling users to mix and match small and large-scale deployments flexibly. The presence of eight PoE injectors in this model further enhances its practicality, supporting multiple powered devices simultaneously.

Both switches support advanced management features, enabling users to monitor and control network performance effectively. They provide capabilities such as VLAN support, bandwidth control, and quality of service (QoS) adjustments to prioritize critical data traffic. The user-friendly interface simplifies the configuration process, ensuring rapid deployment.

Built with rugged designs, these switches comply with military-grade specifications, ensuring durability under extreme temperatures, humidity, and shock-resistant scenarios. They also incorporate features to enhance security, including access control lists (ACLs) and remote management options to safeguard sensitive information.

Additionally, Transition Networks' MIL-SM8TXAF2GPA and MIL-SM802GAF switches support both static and dynamic linking, allowing for easy troubleshooting and diagnostics. The high MTBF (Mean Time Between Failures) ratings of these switches provide confidence in reliability, reducing downtime and maintenance costs in critical applications.

In summary, Transition Networks’ MIL-SM8TXAF2GPA and MIL-SM802GAF managed switches are indispensable in modern networking. Their combination of ruggedness, flexibility, and advanced management features make them suitable for various industries where performance and reliability are paramount. With seamless integration of PoE features, these switches not only enhance network efficiency but also simplify the connectivity of powered devices.
Top Page Image Contents