Operation, Product Features | Transition Networks SIBTF10XX-1XX-MS

SIBTF10xx-1xx-Mx

Operation -- continued

Copper/fiber status LEDs -- continued

Copper LEDs

The function of the copper port LEDs (1, 2, 3, and 4) are as follows:
100MB	ON	The copper port has established a link at	100 MB/s.
100MB	Flashing	The copper port is transmitting signals at 100 Mb/s.
10MB	ON	The copper port has established a link at	10 MB/s.
10MB	Flashing	The copper port is transmitting signals at 10 Mb/s.
FD	ON	The copper port is in full-duplex mode.
FD	OFF	The copper port is in half-duplex mode.

Fiber LEDs

The functions of the fiber port LEDs (2 and 5) are as follows:

100MB	ON	The fiber port has established a link.
100MB	Flashing	The fiber port is transmitting signals.
10MB	--	N/A
10MB	--	N/A.
FD	ON	The fiber port is in full-duplex mode.
FD	OFF	The fiber port is in half-duplex mode.

Fault (red) LED

Fault LED ON (red) indicates that the microcontroller did not initialize correctly; as a result, the switch will not power up.

Fault LED

Copper Port

Fiber Port

Figure 13: Fault LED

Operation -- continued

Product Features

Immunity standards

The industrial switch is designed to meet EN61000-6-2, IEEE1613.

Congestion reduction

The SIBTF10xx-1xx industrial switch does not forward collision signals or error packets from one collision domain to another, which improves baseline-network performance. In addition, the industrial switch filters packets destined for local devices, which reduces network congestion.

Rate conversion

The SIBTF10xx-1xx industrial switch allows connecting 10Mb/s terminal devices on a 10Base-T legacy Ethernet copper network and/or 100Mb/s terminal devices on a 100Base-TX fast Ethernet copper network to 100Mb/s terminal devices on a 100Base FX fast Ethernet fiber network.

Full-Duplex network

In a full-duplex network, maximum cable lengths are determined by the type of cables used. See cable specifications section for the different SIBTF10xx-1xx models. The 512-Bit Rule does not apply in a full-duplex network.

Half-Duplex network (512-Bit Rule)

In a half-duplex network, the maximum cable lengths are determined by the round trip delay limitations of each fast Ethernet collision domain. (A collision domain is the longest path between any two terminal devices: e.g., a terminal, switch, or router.)

The 512-Bit Rule determines the maximum length of cable permitted by calculating the round-trip delay in bit-times (BT) of a particular collision domain. If the result is less than or equal to 512 BT, the path is good.

For more information on the 512-Bit Rule, see the white paper titled “Collision Domains” on the Transition Networks website at: www.transition.com.

24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600

techsupport@transition.com -- Click the “Transition Now” link for a live Web chat.

SIBTF10XX-1XX-MS, SIBTF10XX-1XX-MR specifications

Transition Networks is a respected name in the field of network connectivity solutions, offering a range of products that enhance and optimize data transmission. Among their offerings, the SIBTF10XX-1XX-MS and SIBTF10XX-1XX-MR models stand out for their exceptional features geared toward providing robust industrial network resilience.

The SIBTF10XX-1XX-MS and SIBTF10XX-1XX-MR are managed media converters that serve as vital components in ensuring the seamless transition between different media types in network infrastructure. These devices primarily facilitate the conversion between twisted pair Ethernet and fiber optic connections, making them indispensable in environments where long-distance data transmission is crucial. Their ability to bridge this gap enhances the overall versatility of network designs, offering expanded connectivity options for various applications.

One of the prominent features of these models is their support for Ethernet networks, including 10/100 Mbps data rates. They are equipped with multiple Ethernet ports that allow for flexibility and scalability in network design. The SIBTF10XX series also supports full duplex operation, maximizing data throughput and minimizing possible collisions, which is particularly important for industrial applications where reliability and speed are non-negotiable.

Robust security features are also integral to these converters. They provide advanced management capabilities through features such as VLAN support, SNMP, and port mirroring, enabling network administrators to maintain optimal performance and security. The ability to monitor and manage network traffic ensures that organizations can quickly identify and troubleshoot issues that arise in real time.

In terms of physical characteristics, both models are designed to withstand the rigors of demanding industrial environments. They come with rugged enclosures that offer protection against dust, moisture, and extreme temperatures, which makes them suitable for deployment in factories, transportation systems, and other harsh settings.

The SIBTF10XX series also emphasizes ease of installation and user-friendliness. The plug-and-play design reduces setup time and complexity, allowing for quicker integration into existing systems. Additionally, the web-based management interface offers intuitive controls for configuration and monitoring, making it accessible for users of all technical backgrounds.

In conclusion, the Transition Networks SIBTF10XX-1XX-MS and SIBTF10XX-1XX-MR managed media converters are dynamic solutions that cater to the evolving needs of network infrastructure in industrial environments. With their solid features, advanced technologies, and robust design, they ensure reliable and efficient data transmission across various distances and media types. These products exemplify Transition Networks' commitment to quality and performance in network connectivity solutions.