Barrel Connector Interface Cable | Transition Networks specs

SISTG10xx-111-LR(T) Industrial Media Converter

Transition Networks

Connecting power to the Media Converter, continued

Barrel connector A barrel connector interface cable is included with the Media Converter and can be used to

interface cable convert the barrel connector output of an external AC/DC power supply over to a wire interface that can then be inserted into the terminal block following the instructions and figure 9, both located on page 13 of this manual.

Note: An external AC/DC power supply is not included with the Media Converter. Transition Networks offers an accessory power supply that can be purchased separately, if required. Please see optional accessories in the general information section of this manual for ordering information.

CAUTION

The operating temperature of the Media Converter, when used in conjunction with an AC/DC power supply will be limited to the lesser operating temperature range of either device.

For example: SISTG10xx-111-LRT (-40ºC to +65ºC operating temp) used with SPS-UA12DHT-xx (-25ºC to +65ºC operating temp)

Operating temp for combination is -25ºC to +65ºC

Step	Action
1.	Locate the barrel interface cable included in the Media Converter packaging.
2.	Strip the power wires as required.
3.	Insert one stripped power wire into the terminal block plug, Observe polarity. See
	Figure 9 on page 13.
4.	Secure the wire using a flathead screwdriver by tightening the contact screw.
	See Figure 9 on page 13.
5.	Repeat Steps 3 and 4 until all wires are installed and secured.
6.	Locate an external AC/DC power supply with barrel connector interface and
	make sure the power supply is not plugged into any power source.
7.	Insert barrel connector into the receptacle on the interface cable. See Figure 11.

External AC/DC power supply with barrel connector

Barrel Connector

Interface Cable

Figure 11: Barrel Connector Interface Cable with external power supply

Step

Action

8.Plug external AC/DC power supply into an external power source.

9.Turn ON or plug in the external power supply and the PWR LED should turn ON along with PWR 1 LED and/or PWR 2 LED, depending on whether one or both power supplies are connected and turned ON.

24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600

10/100/1000Base-T to 1000Base-X Industrial Media Converter, SISTG10xx-111-LR(T) specifications

The Transition Networks SISTG10xx-111-LR(T) is an innovative industrial media converter designed to seamlessly bridge the gap between 10/100/1000Base-T Ethernet networks and 1000Base-X fiber optic networks. This reliable device is engineered to enhance network flexibility and extend the distance of data transmission, making it an ideal solution for a variety of industrial applications.

One of the key features of the SISTG10xx-111-LR(T) is its ability to convert electrical signals from copper cabling into optical signals suitable for fiber optic transmission. Supporting Gigabit Ethernet, this media converter can facilitate data transfer speeds of 10/100/1000 Mbps over twisted-pair connections while enabling a fast link to optical networks operating at 1000 Mbps. The result is a robust data transmission solution that combines the advantages of both copper and fiber mediums.

The industrial-grade design of the SISTG10xx-111-LR(T) ensures optimal performance in harsh environmental conditions commonly found in industrial settings. It features a rugged enclosure that is built to withstand extreme temperatures, shock, and vibration, making it suitable for deployment in manufacturing plants, transportation networks, and outdoor settings. With an operating temperature range typically from -40°C to +75°C, it guarantees uninterrupted performance in challenging environments.

Additionally, this media converter supports a wide array of communication protocols, making it versatile for integration into existing networks. The device features automatic MDI/MDI-X operation, which simplifies installation by eliminating the need for crossover cables. Furthermore, the SISTG10xx-111-LR(T) incorporates various diagnostic LEDs that provide real-time monitoring of network status, aiding in quick troubleshooting and maintenance.

Another notable characteristic of this converter is its support for Long Range (LR) optical transmission, allowing for extended distances of up to 10 kilometers depending on the specific fiber used. This capability significantly enhances network coverage, enabling users to connect remote devices without the need for additional network equipment.

In summary, the Transition Networks SISTG10xx-111-LR(T) media converter offers a powerful combination of features, technologies, and characteristics designed for industrial applications. Its robust design, exceptional performance, and ease of use make it a top choice for organizations seeking to improve their network capabilities and ensure reliable data transmission in demanding environments. With the SISTG10xx-111-LR(T) at the forefront, businesses can confidently move toward enhancing their network infrastructure.