Transition Networks 1004 specifications Ethernet Cable Specifications, Table of Contents

Page 3

ETHERNET CABLE SPECIFICATIONS

Maximum number of terminal devices on Ethernet network:

1024

 

 

10Base5 Cable and Connector Specifications

The physical characteristics of the 10Base5 cable must meet or exceed IEEE 802.3 10Base5 specifications.

10Base5 Cable Characteristics:

Cable type:

RG8 Solid Coaxial (ThickNet)

Impedance:

50 Ω @ 10 MHz

Capacitance:

26pF/ft

Maximum Cable Length:

500 meters (1650 feet)

Maximum number network connections:

100

Minimum distance between connections:

2.5 meters (8.2 feet)

Terminate 10Base5 cable at one end using a 50 ohm terminator and at the other end using a 50 ohm terminator grounded to earth ground.

AUI Cable and Connector Specifications

The cable is a special 4-pair individually shielded with an overall braided shield.

Maximum AUI Cable Length:

 

50 meters (165 feet)

AUI Connector Characteristics:

 

 

 

 

AUI Port:

Male DB-15 with locking posts.

 

 

AUI Connection:

Cable shell must be grounded.

 

 

Connector Legend:

1 Logic Ref.

6

Power Return

11 Logic Ref

 

2

Collision+

7

N/C

12

Receive

 

3

Transmit+

8

Logic Ref.

13

Power

 

4

Logic Ref.

9

Collision--

14

Logic Ref.

 

5

Receive+

10 Transmit-

15

N/C

10BaseFL Cable and Connector Specifications

The physical characteristics of the 10BaseFL cable must meet or exceed IEEE

802.310BaseFL specifications.

10BaseFL Cable Characteristics:

Fiber Optic Cable Recommended:

62.5/125 µm multimode fiber

Optional:

100/140 µm multimode fiber

 

85/125 µm multimode fiber

 

50/125 µm multimode fiber

Fiber Optic Transmitter Power:

Average power:

-15.0 dBm

 

Peak power: -12.0 dBm ±1dBm

Fiber Optic Receiver Sensitivity:

Average sensitivity: -27.4 dBm

 

Bit error rate:

≤ 10-10

Maximum Cable Length:

2000 meters (6500 feet)

10BaseFL Connector Characteristics:

ST type connectors (SMA type available upon request)

Table of Contents

1 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . 1

The Model 1004 Repeater Hub . . . . . . . . . . . . . . . . . . . . . . .1

Model 1004 Repeater Hub Features . . . . . . . . . . . . . . . . . . . . .1 Networking the Model 1004 Repeater Hub . . . . . . . . . . . . . . . .2

Model 1004 Repeater Hub Connectors, Indicators,

and Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

2 SITE CONSIDERATIONS. . . . . . . . . . . . . . . . . . . . 4

Ensuring Correct Segment Number . . . . . . . . . . . . . . . . . . . .5 Ensuring Correct 10BaseT Configuration . . . . . . . . . . . . . . . .8

3 INSTALLATION. . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Unpacking the Model 1004 Repeater Hub

. .7

Installing Slide-In Cards

. .8

Installing Model 1004 Repeater Hub

. .9

Connecting Cable to SIC and RJ-45 Connectos

r10

BNC Connector/10Base2 Connection . . . . . . . . . . . . . . . . . . .10 Twisted Pair Connector/10BaseT Connection . . . . . . . . . . . . .11 Female AUConnector/10Base5 or Transceiver Connection . . .12 Male AUIConnector/PC Connection . . . . . . . . . . . . . . . . . . . .13 Fiber OpticConnector/10BaseFL Connection . . . . . . . . . . . . . .13

Connecting Power to Model 1004 Repeater

14

4 OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Monitoring Power LED . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 Monitoring Status LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

5 MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . 16

Fault Isolation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 Technical Support Contact . . . . . . . . . . . . . . . . . . . . . . . . .16

WARRANTY STATEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 ETHERNET CABLE SPECIFICATIONS . . . . . . . . . . . . . . . . . . 19 MODEL 1004 12-PORT HUB SPECIFICATIONS . . . . . . . . 21

19

Model 1004

12-Port Ethernet™ Repeater Hub

i

Page 2 Page 4
Image 3
Page 2 Page 4
Contents TBT-HB-1004 Model 1004 12-PORT HUB Specifications10Base2 Cable Specifications 10BaseT Cable and Connector SpecificationsModel Port Ethernet Repeater Hub Table of Contents Ethernet Cable SpecificationsModel 1004 Repeater Hub IntroductionNetworking the Model 1004 Repeater Hub Warranty StatementTechnical Support Contact MaintenanceFault Isolation Repeater Connectors, Indicators and SwitchMonitoring Status LEDs Monitoring Power LEDOperation Site ConsiderationsEnsuring Correct Segment Number Connecting Power to Model 1004 RepeaterEnsuring Correct 10BaseT Configuration Male AUI Connector/PC ConnectionFiber Optic Connector/10BaseFL Connection Part Number InstallationFemale AUI Connector/10Base5 or Transceiver Connection Unpacking the Model 1004 Repeater HubTwisted Pair Connector/10BaseT Connection Installing Slide-In CardsInstalling Model 1004 Repeater Hub Connecting Cable to SIC/RJ-45 ConnectorsBNC Connector/10Base2 Connection

1004 specifications

Transition Networks 1004 is a versatile and robust solution designed to facilitate efficient networking in various environments. It plays a critical role in converting Ethernet signals over long distances and interfacing with a range of network devices. This capability is essential for businesses and organizations looking to maintain high-performance connectivity without compromising on reliability.

One of the standout features of the Transition Networks 1004 is its support for Gigabit Ethernet, which allows for high data throughput. This ensures that large files and data-heavy applications can be transmitted quickly and reliably, making it an ideal choice for cloud-based services and data centers. The device also supports various Ethernet standards, making it compatible with a wide range of equipment.

The 1004 is equipped with advanced media conversion technology that enables seamless integration between different media types. It can efficiently convert Ethernet signals from copper to fiber and vice versa. This flexibility allows organizations to extend their network reach without the need for complex or costly infrastructure upgrades. Additionally, the ability to use fiber optics significantly increases transmission distances, reducing latency and improving overall network performance.

Furthermore, this device is designed with high durability in mind. Transition Networks has built the 1004 to withstand harsh environmental conditions, making it suitable for deployment in challenging settings. Its rugged design ensures that it can operate effectively even in areas with extreme temperatures or other environmental stressors.

Ease of installation and operation is another key characteristic of the Transition Networks 1004. The device features user-friendly interfaces and straightforward configuration processes, making it accessible for IT personnel of varying skill levels. This reduces deployment time and minimizes the risk of errors during installation.

In summary, Transition Networks 1004 stands out for its combination of Gigabit Ethernet support, media conversion capabilities, rugged durability, and ease of use. These features make it an optimal choice for organizations seeking reliable and efficient network solutions to meet their growing connectivity demands. Whether in a data center, corporate office, or industrial setting, the Transition Networks 1004 provides the performance and flexibility necessary for modern networking needs.
Top Page Image Contents