IBM AT-FS202SC/FS2, AT-FS202SC/FS4, AT-FS201 Electrical Safety EN60950, UL1950, CSA Laser EN60825

Page 36

Translated Safety and Emission Information

Standards: This product meets the following standards.

U.S. Federal Communications Commission

Radiated Energy

Note: This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with this instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Note: Modifications or changes not expressly approved of by the manufacturer or the FCC, can void your right to operate this equipment.

Industry Canada

This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.

1

RFI Emission

EN55022 Class A

2

Warning: In a domestic environment this product may cause radio

 

interference in which case the user may be required to take adequate

 

measures.

 

3

Immunity

EN55024

4 Warning: This product requires shielded cables to comply with emission and immunity standards. If it is used with unshielded cables, the user may be required to take measures to correct the interference problem at their own expense.

5

Electrical Safety

EN60950, UL1950, CSA 950

6

Laser

EN60825

7 Warning Class 1 Laser product.

8 Warning Do not stare into the Laser beam.

At time of installation, the Fiber Optic Lasers comply with FDA Radiation Performance Standard 21CFR Subchapter J, applicable at date of manufacture.

9 This is a “Class 1 LED Product” (AT-FS201, AT-FS202, AT-FS203 models)

Safety

10 Lightning Danger

Danger: Do not work on equipment or cables during periods of lightning activity.

11 Do not block air vents.

12 Power to the hub must be sourced only from the adapter.

28

Page 35 Page 37
Image 36
Page 35 Page 37
Contents Installation Guide Page Electrical Safety and Emission Compliance Statement Radiated EnergyElectrical Safety and Emission Compliance Statement Table of Contents Appendix B Translated Safety and Emission Information Where to Find Web-based Guides Document Conventions Welcome to Allied TelesynContacting Allied Telesyn Description AT-FS202SC/FS1 AT-FS202SC/FS4AT-FS20x Series Front Panel AT-FS202 Model FS1 Key Features Status LEDsTwisted-Pair Port Port SpeedFiber Optic Port Auto MDI/MDI-XSwitch Performance DIP SwitchesNetwork Topologies Store and ForwardTypical Configuration Using the AT-FS202 Switch Description Installing the Switch Verifying Package ContentsPlanning the Installation Operating Maximum Cable Type Mode DistanceAT-FS202SC/FS1 Selecting a Site Installing the Switch DIPDIP Warranty Registration Installing the Switch Troubleshooting Troubleshooting Technical Specifications TemperaturePhysical Electrical RatingFiber Optic Port Specifications Agency CertificationsFS1 SMF Pinout Assignments FS4 SMFMDI Technical Specifications Translated Safety and Emission Information Electrical Safety EN60950, UL1950, CSA Laser EN60825 Safety  10 Lightning DangerUSA/Canada Europe EU13 Betriebstemperatur  13 Betjeningstemperatur Eisen Dit product voldoet aan de volgende eisenElectrische Veiligheid EN60950, UL1950, CSA Laser EN60825 Veiligheid  10 Gevaar Voor Blikseminslag 13 BedrijfstemperatuurSécurité électrique EN60950, UL1950, CSA Laser EN60825 Sécurité  10 Danger De Foudre 13 Température De Fonctionnement Standardit Tämä tuote on seuraavien standardien mukainenSähköturvallisuus EN60950, UL1950, CSA Laser EN60825 Turvallisuus  10 Salamaniskuvaara 13 Temperatura Di Funzionamento Laser EN60825 Sikkerhet  10 Fare For Lynnedslag13 Driftstemperatur  13 Temperatura De Funcionamento Seguridad eléctrica TUV-EN60950, UL1950, CSA Laser EN60825Seguridad  10 Peligro De Rayos  13 Temperatura Requerida Para La OperaciónElsäkerhet TUV-EN60950, UL1950, CSA Laser EN60825 Säkerhet  10 Fara För Blixtnedslag

AT-FS202, AT-FS202SC/FS3, AT-FS201, AT-FS202SC/FS1, AT-FS202SC/FS4 specifications

The IBM AT-FS202 series includes a range of compact Ethernet switches designed to meet the needs of evolving network environments. These models, namely the AT-FS202SC/FS4, AT-FS202SC/FS2, AT-FS202, AT-FS202SC/FS3, and AT-FS201, offer a blend of performance, flexibility, and reliability tailored for small to medium-sized networks or edge installations.

One of the standout features across these models is their support for both copper and fiber connectivity. The AT-FS202SC series specifically supports various transceiver options, allowing network administrators to choose the appropriate media type for their deployments. This versatility ensures that organizations can utilize their existing infrastructure while preparing for future upgrades.

In terms of performance, these switches provide wire-speed forwarding, enabling seamless data transfer and minimizing latency. With auto-sensing ports, they automatically detect the connected device and adjust to the necessary speed, whether it be 10/100/1000 Mbps. This ensures efficient operation within diverse environments, accommodating both legacy and modern devices without compromising on speed.

Security is an essential consideration for any network equipment, and the IBM AT-FS202 series is no exception. The switches include features such as port-based authentication and support for VLANs, which enhance network segmentation and isolate traffic flows. These security measures help protect sensitive data and restrict access to unauthorized users.

Management capabilities are another significant characteristic of the AT-FS202 series. These switches come equipped with management interfaces that allow for configuration, monitoring, and troubleshooting. The ability to manage network traffic effectively aids in sustaining optimal performance and quick resolution of potential issues.

Power consumption is optimized across the IBM AT-FS202 series, ensuring that deployment of these switches aligns with energy efficiency goals. This is particularly beneficial for businesses concerned with operational costs and environmental impact.

Overall, the IBM AT-FS202SC/FS4, AT-FS202SC/FS2, AT-FS202, AT-FS202SC/FS3, and AT-FS201 are robust solutions suited for diverse networking needs. Their combination of flexible connectivity options, performance efficiency, security features, and management capabilities position them as valuable assets for network administrators looking to build a resilient infrastructure in today's dynamic technological landscape.
Top Page Image Contents