IBM B24X manual Part number information, Description Part number Feature code

providing network connectivity to servers within a rack, or as a compute node interconnect in HPC environments. Complemented by a full Ethernet and IP product portfolio available from IBM System Networking, IBM B24X can also be part of a standardized network infrastructure running on the proven IronWare Operating System.

Part number information

Table 1 lists the orderable part numbers for the B24X and associated options through System x.

Table 1. IBM part numbers and feature codes for ordering

Description	Part number	Feature code
IBM Ethernet Switch B24X	0563-012	0563-HC5
300 W AC Power Supply (for 1+1 redundancy)	69Y0373	4774
10 GbE 300 m, SFP+, 10GBASE-SR (duplex LC, MMF, 850 nm,	69Y0389	6416
OM)

Note: OM = Optical Monitoring supported. SMF = single-mode fiber. MMF = multi-mode fiber. MMF distance supported depends on cabling type. Use OM3 50 ìm (2000 MHz*km) MMF to support the farthest distances.

IBM Ethernet Switch B24X (0563-012 / 0563-HC5) ships with the following:

zOne IBM Ethernet Switch B24X, which includes:

zTwenty-four 10/1 GbE SFP+ ports plus four 10/100/1000 MbE RJ-45 ports

zOne out-of-band 10/100/1000 MbE RJ-45 management port

zOne DB9 male serial console port

zOne hot-swappable triple-fan tray

zOne (of two) 300 W AC hot-swappable power supply

zOne 1.5 m DB9 female-to-DB9 female straight-through serial console cable

zRack mount brackets for mounting into an EIA-310D compliant rack

zIBM Ethernet Switch x-series Installation and User Guide

zStatement of limited warranty

zBrocade end user license agreement

zSafety and regulatory notices

zCD-ROM with manuals and environmental notices

Note: Qualified SFP+ or SFP transceivers are required for each SFP+ port and are not included.

IBM Ethernet Switch B24X 2