Fujitsu R630, V810 manual System expansions, Information about boards

Page 35

System expansions

!

As the PC has to be shut down in order to install/deinstall system hardware components,

it is a good idea to print out the relevant sections of this chapter.

 

It may be necessary to update the BIOS when carrying out a system expansion or hardware upgrade. Additional information is contained in the "BIOS Setup" manual or possibly in the technical manual for the mainboard.

When installing components that become very hot, make sure that the maximum permissible temperatures of the individual components are not exceeded.

The workstation must be switched off when installing/removing the system expansions and may not be in the energy-saving mode.

Remove the power plug before opening the workstation.

This chapter describes all the activities required to modify your workstation hardware (e.g. installing boards or drives).

Read the supplied documentation before installing new drives and/or boards.

Refer to the technical manual for the mainboard before making any extensions to the mainboard.

Information about boards

Take care with the locking mechanisms (catches and centring pins) when you are replacing boards or components on boards.

To prevent damage to the board or the components and conductors on it, please take care when you insert or remove boards. Make sure expansion boards are inserted straightly.

Never use sharp objects (screwdrivers) for leverage.

Boards with electrostatic sensitive devices (ESD) are identifiable by the label shown.

When you handle boards fitted with ESDs, you must, under all circumstances, observe the following points:

●You must statically discharge yourself before working with boards (e.g. by touching a grounded object).

●The equipment and tools you use must be free of static charges.

●Pull out the power plug before inserting or removing boards.

●Always hold boards with ESDs by their edges.

●Never touch pins or conductors on boards fitted with ESDs.

A26361-K680-Z122-1-7619, Edition 1

27

Page 34 Page 36
Image 35
Page 34 Page 36
Contents Answers Are there Page A26361-K680-Z122-1-7619 Operating manual Celsius R630Page Contents Contents Documentation or Drivers & Utilities CD Your Celsius R/CELSIUSNotational conventions CE marking Safety notesImportant notes Energy saving, disposal and recyclingTransporting the workstation Cleaning the workstationFCC Class B Compliance Statement External devices Steps for initial setupPreparing for use Unpacking and checking the deliveryConnect the monitor, mouse and keyboard Setting up the workstationConnecting the monitor Connecting a keyboard Connecting the mouseInitial switch-on Software will be installed Connecting the workstation to the mains voltageSwitching on monitor and workstation Disconnecting cables Connecting external devicesInstalling the software Connecting cablesOut Connections on the workstationSettings of the parallel port Connecting external devices to the serial portConnecting external devices to the parallel port Settings of the serial portConnecting external devices to the USB ports Operation Switching the workstation onSwitching off the workstation Standby/ Energy saving mode Indicators on the workstationLCD / status indicator panel Power onCD-ROM indicator ErrorLAN access SmartCard reader indicatorKeyboard Important keys and key combinations Protect the floppy disk against being overwritten or erased Working with floppy disksTo insert a diskette To remove a disketteAnti-theft protection Settings in Bios SetupAccess authorisation via SmartCard Property and data protectionPage Internal power supply overloaded Troubleshooting and tipsInstalling new software Mains voltage supply is faultyScreen stays blank Wrong RAM modules have been inserted No mouse pointer displayed on the screenFloppy disk cannot be read or written Wrong monitor has been set under Window XPTips Error messages on the screenRestoring the hard disk contents Time and/or date is not correctInformation about boards System expansionsOpening the casing Closing the casing Installing board with screw Installing and removing a boardSystem expansions Removing board with screw Installing board with clip System expansions Removing board with clips System expansions Scsi drives Installing and removing drivesRemoving the front panel IDE drivesAttaching the front panel Installing an accessible drive System expansions Removing an accessible drive System expansions Removing the floppy disk drive Changing the floppy disk driveInstalling the floppy disk drive Installing or removing the hard disk drive Installing a hard disk drive Removing a hard disk drive Installing a SmartCard reader for the first time Installing and removing SmartCard readerInstalling a SmartCard reader Removing a SmartCard reader Installing front USB or USB audio ports Installing and removing front USB or USB audio portsSystem expansions Removing front USB or USB audio ports System expansions Removing ventilation duct Extensions to the mainboardInstalling ventilation duct System expansions Replacing processor Upgrading main memoryInstalling second processor Removing second processor Replacing lithium battery Page Electrical data Technical dataDimensions WeightPage Cable IndexIndex Index Devices with main power

R630, V810 specifications

The Fujitsu R630 and V810 are part of Fujitsu's lineup of powerful server systems that cater to enterprise-level computing needs, providing efficiency, reliability, and scalability. Designed for demanding workloads, these servers have gained recognition for their performance and versatility in various business environments.

The Fujitsu R630 is a 1U rack server that excels in providing outstanding performance in a compact form factor. It is powered by Intel's latest Xeon processors, which allow for enhanced performance, optimized energy efficiency, and improved reliability. The server supports multiple processor configurations, accommodating up to two processors, providing a robust platform for running critical applications. With a memory capacity of up to 768 GB of RAM, the R630 ensures that even the most memory-intensive tasks can be handled with ease.

One of the main features of the R630 is its advanced storage capabilities. It supports various storage options, including SAS, SATA, and SSD drives. This flexibility allows organizations to tailor their storage configurations based on specific performance and capacity requirements. Moreover, the R630’s hot-swap drive bays facilitate easy maintenance and upgrades without downtime, making it ideal for businesses that require continuous operation.

In contrast, the Fujitsu V810 offers a different focus, being a tower server designed for small to medium-sized businesses seeking a powerful yet cost-effective solution. The V810 features a tower design that allows for easy scalability. It supports Intel Xeon processors, ensuring robust performance across various workloads. Memory support is also impressive, with the option to install up to 64 GB of RAM, catering to the needs of demanding applications.

The V810 stands out with its energy-efficient design, which not only reduces operating costs but also contributes to a greener IT infrastructure. With features such as power management tools and low-noise operation, it is suitable for office environments where noise levels must be kept to a minimum.

Both the R630 and V810 incorporate Fujitsu's reliable management technologies, providing tools for remote management and monitoring of server health. Additionally, they come with comprehensive security features to protect sensitive business data.

In summary, the Fujitsu R630 and V810 are designed for businesses looking for flexible, reliable, and high-performance server solutions. Each model excels in its respective domain, making them valuable assets for enterprises aiming to enhance their IT infrastructure.
Top Page Image Contents