FTP-621MCL351/352
(Continued)
| Item |
| Specifications | |
|
| 24 V DC ± 5%, average:*2 | ||
|
| 0.41 (0.56) A (at | 25 mm/s printing speed, 25% printing ratio) | |
| For head | 0.63 (1.11) A (at | 50 mm/s printing speed, 25% printing ratio) | |
Power supply |
| 1.23 (1.65) A (at 100 mm/s printing speed, 25% printing ratio) | ||
| ( ): Peak |
| ||
|
|
| ||
| For motor | 24 VDC ± 5%, 1.0 A maximum | ||
|
|
| ||
| For logic | 5 VDC ± 5%, 0.5 A maximum | ||
|
|
| ||
Weight |
| Mechanism with cutter: approx. 450 g. Interface board: approx. 100 g | ||
|
|
| ||
Dimensions | Mechanism + cutter | 107 (W) × 60 (D) × 71.0 (H) mm (excluding connector) | ||
Interface board | 140 (W) × 89 (D) × 24.0 (H) mm | |||
| ||||
|
|
|
| |
| Thermal head | Pulse durability | : 5 × 107 pulse/dot (using Fujitsu Takamisawa's standard | |
Life |
| driving method) | ||
|
| |||
| Wear resistance : 50 km (at 12.5% printing ratio) | |||
|
| |||
|
|
| ||
| Cutter | Cutting life: 3 × 105 times | ||
|
|
|
| |
| Operating temperature | +5 to +40°C*3 |
| |
Environmental |
|
|
| |
Operating humidity | 20 to 85% RH (no condensation) | |||
conditions | ||||
|
|
| ||
|
|
| ||
| Storage temperature | |||
|
|
| ||
| Storage humidity | 5 to 95% RH (no condensation) | ||
|
|
| ||
| Head temperature | By thermistor (applied energy control, abnormal temperature detection) | ||
|
|
| ||
Detection | Paper out/Mark detect | By photointerrupter (command set) | ||
|
|
|
| |
| By microswitch |
| ||
|
|
|
| |
Paper width |
|
| ||
|
|
|
| |
Recommended thermal sensitive | 1 ply paper in roll: | |||
paper*4 |
| |||
*1: The data to be printed is automatically read out by the printer driver equipment memory (host system frame memory). The communication is parameter transfer.
*2: At 25°C, maximum applied voltage, minimum head resistance, specified paper, stable printing ratio.
*3: Temperature range for guaranteed printing density. It can operate at 0 to +40°C.
*4: Please contact us for other thermal papers.
3