FTP-627MCL401/601
nINTERFACE board
Connectors on Control Board
| Name | Functions | Remarks | Note |
CN1 | +24V power supply connector | Connection for +24V power supply |
|
|
CN2 | Connection for serial interface |
|
| |
CN3 | USB I/F connector | Connection for USB interface |
|
|
CN4 | - | Connection for thermal head + paper feed motor |
| |
CN5 | Cutter connector | Connection for paper cutter |
|
|
CN6 | Operation panel connector | Connection for operation panel |
| *1 |
CN7 | Near end sensor connector | Connection for near end switch |
| *2 |
CN8 | - | - |
|
|
CN9 | Logic power connector | Connection for +5V power Supply |
|
|
CN10 | Head/motor connector | Connection for thermal head & paper feed motor |
| |
Note: | *1: Option |
|
|
|
| *2: Depends on specification |
|
|
|