Fujitsu FTP-629MCL054 manual Wear resistance 100 km at 12.5% print ratio

FTP-629MCL054/353/354-R

	Item	Specifications
Part number		FTP-629MCL054R	FTP-629MCL353/354-R
Interfaces		Centronics / RS-232C standard / USB
	For head	24 VDC ±5% 1.4A (3A) (24V , 25% printing ratio)
	For printer motor	24VDC±5% 1A maximum
Power
	For cutter motor	---	24VDC±5% 1.2 A maximum
supply
	For logic	5VDC±5% 0.2 A maximum
Dimensions	Printer Mechanism	82.2 × 40.5 × 20.5 mm	---
Wx D x H	Printer Mechanism w/cutter	---	90.6 × 62.5 × 37.7mm
	Interface board (standard)	70 × 60 × 24mm
	Interface board (hi speed)	95.1 x 73.6 x 18.6mm
	Interface board	77 x 50x 215mm
Weight	Printer mechanism	Approximately 110g	---
	Printer mechanism w/cutter	---	Approximately 270g
	Interface board (standard)	Approximately 30g
	Interface board (hi speed)	Approximately 45g
	Interface	Approximately 22g
Life	Head	Pulse durability: 1 × 108 pulse/dot (using Fujitsu Components' standard driving method)
		Wear resistance: 100 km (at 12.5% print ratio)
	Cutter	---	500,000 cuts min.
Environmental	Operating temperature	-25˚C to +70°C (Guarantee)	-10˚C to +55°C (Guarantee)
conditions	Operating humidity	20 to 85% RH (no condensation)
	Storage temperature	–40°C to +85°C (excluding paper)	–20°C to +60°C
	Storage humidity	5 to 95% RH (no condensation)
	Head temperature	By thermistor
Detection	Paper out/Mark detect	By photointerrupter
	Head release	By slide switch
	High sensitivity paper	TF50KS-E4 (Nippon paper)
	Standard paper	TF60KS-E (Nippon paper), FTP-020P0104 (58mm),
		PD150R (Oji paper), FTP-020P020P0701 (58mm)
Recommended	Medium term paper	TP60KS-F1 (Nippon paper),FTP-020P0102(58mm),
		PD170R (Oji paper)
thermal sensitive
		P220VBB-1 (Mitsubishi paper)
paper
		PD160R-N (Oji paper)
	Long term paper	AFP-235 (Mitsubishi paper)
		TP50KJ-R (Nippon paper)
		HA220AA (Nippon paper)