Fujitsu B24W-5 manual Power cable, Transporting the device, Cleaning the device

Page 12

Important notes

•The device may only be operated in the wide format (0° landscape mode). The buttons of the control panel are located at the bottom in the middle of the monitor.

•Store this manual close to the device. If you pass the device on to third parties, you should pass this manual on with it.

•We recommend that you place your device on a durable, non-slip surface. In view of the many different finishes and varnishes used on furniture, it is possible that the feet of the device may mark the surface they stand on.

•To ensure sufficient ventilation, the air supply and air outlet openings of the monitor must never be blocked.

Power cable

Use the supplied power cable only.

Use the following guidelines if it is necessary to replace the original cable set.

•The female/male receptacles of the cord set must meet IEC60320/CEE-22 requirements.

•The cable has to be HAR-certified or VDE-certified. The mark HAR or VDE will appear on the outer sheath.

•For devices which are mounted on a desk or table, type SVT or SJT cable sets may be used. For devices which sit on the floor, only SJT type cable sets may be used.

•The cable set must be selected according to the rated current for your device.

•If necessary, replace the original power cable with a regular grounded 3-core mains lead.

Transporting the device

Transport all parts separately in their original packaging or in a packaging which protects them from knocks and jolts, to the new site.

Do not unpack them until all transportation manoeuvres are completed.

If the device is brought from a cold environment into the room where it will be used, condensation may occur. Before operating the device, wait until it is absolutely dry and has reached approximately the same temperature as the installation site.

Cleaning the device

Switch off the device and unplug the power plug.

Do not clean any interior parts yourself, leave this job to a service technician. Do not use any cleaning agents that contain abrasives or may corrode plastic. Ensure that no liquid enters the device.

The display surface of the device is sensitive to pressure and scratches. Clean it only using a soft, slightly moistened cloth.

The surface of the casing can be cleaned with a dry cloth. If particularly dirty, use a cloth that has been moistened in mild domestic detergent and then carefully wrung out.

4

A26361-K1334-Z220-1-7619, edition 1

Page 11 Page 13
Image 12
Page 11 Page 13
Contents B24W-5 ECO Do you have Page Copyright Fujitsu B24W-5 ECO Page Contents Contents Your LCD screen Target groupYour LCD screen Not switch off the device Further informationNotational conventions This fontSafety instructions Important notesImportant notes Power cable Cleaning the deviceTransporting the device CE marking Energy StarDisposal and recycling Recupel SwicoSetting up the device Getting startedUnpacking and checking the delivery Getting startedSetting up an ergonomic video workstation Adjusting the height Adjusting the inclinationAdjusting the rotation Removing monitor base Assemble wall bracket optionalConnecting the device Connecting cables to the monitorConnecting cables to the computer Switching the device on and off LED indicator StatusOperation OperationLevel Operation Power saving mode Normal Operation FrontChanging the monitor settings Performing auto-adjustment of the monitorSelecting input signal D-SUB/DVI-D Changing the monitor settings using the OSD menu Activate/deactivate ECO operating modeLocking the OSD menu Locking the ON/OFF buttonPress the SELECT/MENU activate the OSD menu Adjusting the brightness and contrast OSD menu functionsAdjusting the screen size and position Adjusting the volumeSetting the colour temperature and colours Adjusting the display of the OSD menu Setting functions in the Advanced menuDisplaying information Page Troubleshooting TroubleshootingHaving this problem? Check the following points Picture disturbances vertical lines Press Button to perform Explanatory information about standard ISO Explanatory information about standard ISOLit or unlit pixels Technical data Technical dataB24W-5 ECO Dimensions and weight Electrical dataPreset operating modes Technical data Ambient conditionsVESA-DDC-compatible VGA interface Most frequent operating modesSUB port Pin MeaningDVI-D port

B24W-5 specifications

The Fujitsu B24W-5 is a versatile 24-inch monitor designed for professional use, offering a blend of performance, functionality, and user comfort. This model is particularly well-suited for office environments and settings where prolonged usage may lead to fatigue.

One of the standout features of the B24W-5 is its IPS technology, which provides wide viewing angles and consistent color reproduction. This is critical for graphic designers, photographers, and content creators who require accurate color representation in their work. The monitor boasts a Full HD resolution of 1920x1080 pixels, ensuring that images and text appear sharp and detailed.

The B24W-5 is equipped with a range of connectivity options, including DisplayPort, DVI-D, and HDMI, allowing users to connect multiple devices effortlessly. This flexibility makes it simple to switch between computers or to use the monitor in multi-display setups, enhancing productivity for users who regularly multitask.

In terms of ergonomics, the Fujitsu B24W-5 features a fully adjustable stand that allows for height, tilt, swivel, and pivot adjustments. This ensures users can position the monitor at an optimal angle, reducing strain on the neck and eyes during extended periods of use. Additionally, it is VESA mount compatible, giving users the option to mount it on a wall or an adjustable arm for even greater flexibility.

The monitor is also designed with eye comfort in mind, incorporating features like Flicker-Free technology and a Blue Light Reducer. These technologies help to minimize eye strain, making it a suitable choice for environments where employees may spend long hours in front of a screen.

Another significant characteristic of the B24W-5 is its energy efficiency. It meets various environmental standards, including EnergyStar, which helps organizations reduce their carbon footprint while enjoying top-notch display performance.

Overall, the Fujitsu B24W-5 combines advanced display technologies and ergonomic features to deliver a reliable and comfortable viewing experience, making it an excellent choice for professional users in diverse workplaces. Its emphasis on ergonomics, connectivity, and visual accuracy sets it apart in the competitive monitor market.
Top Page Image Contents