Fujitsu B19W-5 ECO manual Power cable, Transporting the device, Cleaning the device

Page 12

Important notes

•The device must only be operated in landscape mode (0°) and portrait mode (90°). The control buttons are located in the middle of the bottom of the monitor in landscape mode (0°) and at the left-hand side of the monitor in portrait mode (90°).

•Store this manual close to the device. If you pass the device on to third parties, you should pass this manual on with it.

•We recommend that you place your device on a durable, non-slip surface. In view of the many different finishes and varnishes used on furniture, it is possible that the feet of the device may mark the surface they stand on.

•To ensure sufficient ventilation, the air supply and air outlet openings of the monitor must never be blocked.

Power cable

Use the supplied power cable only.

Use the following guidelines if it is necessary to replace the original cable set.

•The female/male receptacles of the cord set must meet IEC60320/CEE-22 requirements.

•The cable has to be HAR-certified or VDE-certified. The mark HAR or VDE will appear on the outer sheath.

•For devices which are mounted on a desk or table, type SVT or SJT cable sets may be used. For devices which sit on the floor, only SJT type cable sets may be used.

•The cable set must be selected according to the rated current for your device.

•If necessary, replace the original power cable with a regular grounded 3-core mains lead.

Transporting the device

Transport all parts separately in their original packaging or in a packaging which protects them from knocks and jolts, to the new site.

Do not unpack them until all transportation manoeuvres are completed.

If the device is brought from a cold environment into the room where it will be used, condensation may occur. Before operating the device, wait until it is absolutely dry and has reached approximately the same temperature as the installation site.

Cleaning the device

Switch off the device and unplug the power plug.

Do not clean any interior parts yourself, leave this job to a service technician. Do not use any cleaning agents that contain abrasives or may corrode plastic. Ensure that no liquid enters the device.

The display surface of the device is sensitive to pressure and scratches. Clean it only using a soft, slightly moistened cloth.

The surface of the casing can be cleaned with a dry cloth. If particularly dirty, use a cloth that has been moistened in mild domestic detergent and then carefully wrung out.

4

A26361-K1333-Z220-1-7619, edition 1

Page 11 Page 13
Image 12
Page 11 Page 13
Contents B19W-5 ECO Do you have Page Copyright Fujitsu B19W-5 ECO Page Contents Contents Your LCD screen Target groupYour LCD screen Not switch off the device Further informationNotational conventions This fontSafety instructions Important notesImportant notes Power cable Cleaning the deviceTransporting the device CE marking Energy StarDisposal and recycling Recupel SwicoSetting up the device Getting startedUnpacking and checking the delivery Getting startedSetting up an ergonomic video workstation Adjusting the height Adjusting the inclinationAdjusting the rotation Adjusting portrait format Removing monitor baseConnecting the device Connecting cables to the monitorConnecting cables to the computer Switching the device on and off LED indicator StatusOperation OperationLevel Operation Energy saving mode Normal ECO mode Changing the monitor settings Performing auto-adjustment of the monitorSelecting input signal D-SUB/DVI-D Changing the monitor settings using the OSD menu Activate/deactivate ECO operating modeLocking the OSD menu Locking the ON/OFF buttonPress the SELECT/MENU activate the OSD menu Adjusting the brightness and contrast OSD menu functionsAdjusting the screen size and position Adjusting the volumeSetting the colour temperature and colours Adjusting the display of the OSD menu Setting functions in the Advanced menuDisplaying information Troubleshooting TroubleshootingHaving this problem? Check the following points Troubleshooting DIN EN ISO 13406-2 standard Permanently unlit or lit pixelsDimensions and weight Accessories Electrical dataTechnical specification Technical specificationPreset operating modes VESA-DDC-compatible VGA interfaceMost frequent operating modes Technical specification Ambient conditionsSUB D port Pin MeaningDVI-D port

B19W-5 ECO specifications

The Fujitsu B19W-5 ECO is an innovative and environmentally-friendly monitor that caters to businesses and users seeking efficiency and clarity in their visual tasks. Designed with sustainability in mind, the B19W-5 ECO embodies Fujitsu's commitment to reducing carbon footprints while delivering robust performance.

One of the standout features of the B19W-5 ECO is its 19-inch widescreen display. With a resolution of 1280x1024 pixels, it ensures sharp and clear images, making it ideal for both professional and personal use. This monitor utilizes a VA panel technology that provides wide viewing angles and excellent color reproduction, enabling users to enjoy vibrant visuals from different perspectives.

The B19W-5 ECO boasts a quick response time, ensuring smooth and fluid transitions during video playback or when working with graphics-intensive applications. This makes it a suitable choice for not only office tasks but also light gaming and multimedia consumption. The monitor's brightness reaches up to 250 cd/m², ensuring visibility even in well-lit environments.

In terms of connectivity, the Fujitsu B19W-5 ECO features multiple input options, including VGA and DVI ports, allowing users to easily connect to various devices, whether it be a desktop PC or a laptop. The inclusion of a USB hub further enhances usability by enabling easy access to peripheral devices.

Another remarkable characteristic of the B19W-5 ECO is its energy efficiency. The monitor is Energy Star certified, which signifies that it meets strict energy efficiency guidelines. Its intelligent power management features contribute to reduced energy consumption, which can significantly lower operational costs for businesses.

The ergonomics of the B19W-5 ECO are also noteworthy. The monitor comes with an adjustable stand that allows users to tilt or swivel the screen for optimal viewing angles. This feature not only enhances comfort but also supports better posture, reducing the chances of strain during prolonged use.

In summary, the Fujitsu B19W-5 ECO is more than just a monitor; it is a blend of functionality, sustainability, and user-friendly features. With its eco-conscious design, superior display quality, versatile connectivity options, and ergonomic adjustments, it stands out in the market as a reliable choice for users who prioritize both performance and environmental responsibility.
Top Page Image Contents