Fujitsu FTP-6x9MCL103R, FTP-629MCL383-R, FTP-629MCL103-R, FTP-629DCL014R manual FTP-629MCL103/383-R

FTP-629MCL103/383-R

(Continued)

Item		Specifications
Part number		FTP-629MCL103/105-R	FTP-629MCL383#01/#02-R
Power supply	For head	24 VDC ±5%, 1.4A (3A) (24V, 25% printing ratio)
	For printer motor	24 VDC ±5% 1A maximum
	For cutter motor	---	24 VDC ±5% 1A maximum
	For logic	5 VDC ±5% 0.2A maximum
Dimension	Printer mechanism	82.5 x 40.5 x 20.5mm	---
W x D x H
	Printer mechanism with cutter	---	90.5 x 70.3 x 37.4mm
	Interface board (standard speed)	70 x 60 x 24mm
	Interface board (medium speed)	95.1 x 73.6 x 18.6mm
	Interface board (high speed)	77 x 50 x 21.5mm
Weight	Printer mechanism	Approximately 110g	---
	Printer mechanism with cutter	---	Approximately 300g
	Interface board (standard speed)	Approximately 30g
	Interface board (medium speed)	Approximately 45 g
	Interface board (high speed)	Approximately 22g
Life	Head	Pulse durability: 1 x 108 pulse/dot (using Fujitsu's standard driving
		method)
		Wear resistance: 100km (at 12.5% print ratio)
	Cutter	---	500,000 cuts minimum
	Platen	5,000 times (open/close)
Environmental	Operating temperature	-25ºC to +70ºC (guarantee)	0ºC to +50ºC
conditions
	Operating humidity	20 to 85% RH (no condensation)
	Storage temperature	-40ºC to +85ºC	-20ºC to +60ºC
	Storage humidity	5 to 95% RH (no condensation)
Detection	Head temperature	By thermistor
	Paper out/Mark detect	By photointerruptor
	Head release	By slide switch
Recommended	High sensitive paper	TF50KS-E4 (Nippon paper)
thermal
	Standard paper	TF60KS-E2 (Nippon paper), FTP-020P0104 (58mm)
sensitive paper		PD150R (Oji paper), FTP-020P0701 (58mm)
	Medium life storage paper	TF60KS-F1 (Nippon paper), FTP-020P0102 (58mm)
		PD170R (Oji paper)
		P220VBB-1 (Mitsubishi paper)
		PD160R-N (Oji paper)
	Long life storage paper	AFP-235 (Mitsubishi paper)
		TP50KJ-R (Nippon paper)
		HA220AA (Nippon paper)