Fujitsu FTP-641MCL351, FTP-641MCL352 manual Specifications

FTP-641MCL351/352

(Continued)

	Item		Specifications
		24 VDC ± 5%, average:*2
		0.82 (1.11) A (at 25 mm/s printing speed,			25% printing ratio)
	For head	1.25 (1.66) A (at 50 mm/s printing speed,			25% printing ratio)
		4.75 (6.30) A (at 50 mm/s printing speed, 100% printing ratio)
Power supply		( ): Peak
	For motor	24 VDC ± 5%, 1.0 A maximum
	For logic	5 VDC ± 5%, 0.5 A maximum
Weight		Mechanism with cutter: approximately 610 g
		Interface board: approximately 100 g
Dimensions	Mechanism + cutter	159 (W) × 60 (D) × 71.0 (H) mm (excluding connector)
	Interface board	140 (W) × 89 (D) × 24.0 (H) mm
	Thermal head	Pulse durability : 5 × 107 pulse/dot (using Fujitsu & Takamisawa's
Life			standard driving method)
		Wear resistance : 50 km (at 12.5% printing ratio)
	Cutter	Cutting life: 3 × 105 times
	Operating temperature	+5 to +40°C*3
Environmental	Operating humidity	20 to 85% RH (no condensation)
conditions	Storage temperature	–20 to +60°C (excluding paper)
	Storage humidity	5 to 95% RH (no condensation)
	Head temperature	By thermistor (applied energy control, abnormal temperature detection)
Detection	Paper out/Mark detect	By photointerrupter (command set)
	Head-up	By microswitch
Paper width		+0
		114–1mm
Recommended thermal sensitive		1 ply paper in roll	:	FTP-040P0020
paper*4

*1: The data to be printed is automatically read out by the printer driver equipment memory (host system frame memory). The communication is parameter transfer.

*2: At 25°C, maximum applied voltage, minimum head resistance, specified paper, stable printing ratio.

*3: Temperature range for guaranteed printing density. It can operate at 0 to +40°C.

*4: Please contact us for other thermal papers.

3