Fujitsu FTP-631MCL352, FTP-631MCL351 manual Specifications

FTP-631MCL351/352

(Continued)

	Item		Specifications
		24 VDC ± 5%, average:*2
		0.55 (0.56) A (at 25 mm/s printing speed,			25% printing ratio)
	For head	0.84 (1.11) A (at 50 mm/s printing speed,			25% printing ratio)
Power supply		3.23 (4.29) A (at 50 mm/s printing speed, 100% printing ratio)
		( ): Peak
	For motor	24 VDC ± 5%, 1.0 A maximum
	For logic	5 VDC ± 5%, 0.5 A maximum
Weight		Mechanism with cutter: approx. 540 g. Interface board: approx. 100 g
Dimension	Mechanism + cutter	132 (W) × 60 (D) × 71.0 (H) mm (Excluding connector)
	Interface board	140 (W) × 89 (D) × 24.0 (H) mm
Life	Thermal head	Pulse durability : 5 × 107 pulse/dot (usingFujitsu Takamisawa's standard
			driving method)
		Wear resistance : 50 km (at 12.5% printing ratio)
	Cutter	Cutting life: 3 × 105 times
Environmental	Operating temperature	+5 to +40°C*3
condition	Operating humidity	20 to 85% RH (no condensation)
	Storage temperature	–20 to +60°C (excluding paper)
	Storage humidity	5 to 95% RH (no condensation)
	Head temperature	By thermistor (applied energy control, abnormal temperature detection)
Detection	Paper out/Mark detect	By photointerrupter (command set)
	Head-up	By microswitch
Paper width		+0
		85–1mm
Recommended thermal sensitive		1 ply paper in roll	:	FTP-030P0020
paper*4

*1: The data to be printed is automatically read out by the printer driver equipment memory (host system frame memory). The communication is parameter transfer.

*2: At 25°C, maximum applied voltage, minimum head resistance, specified paper, stable printing ratio.

*3: Temperature range for guaranteed printing density. It can operate at 0 to +40°C.

*4: Please contact us for other thermal papers.

3